Difficulty

Moderate

Steps

6

Time Required

                          15 - 20 minutes

Sections

2

  • Back Cover
  • 4 steps
  • Speaker
  • 2 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackOnePlus 6T

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Make sure the phone is powered off and placed with the back cover facing towards you on a stable surface.

Make sure the phone is powered off and placed with the back cover facing towards you on a stable surface.

1024

Step 2

  • Pop open the SIM card tray by inserting a SIM card removal tool into a small hole on the upper-left side of the phone.
  • Carefully remove the SIM card from its tray.

Pop open the SIM card tray by inserting a SIM card removal tool into a small hole on the upper-left side of the phone.

Carefully remove the SIM card from its tray.

Step 3

  • Loosen the binding glue within the phone using a hairdryer or an iOpener.
  • If you choose to use a hairdryer, hold the dryer at least eight inches from the phone and apply heat for two minutes in a circular motion around the edges of the phone.

Loosen the binding glue within the phone using a hairdryer or an iOpener.

If you choose to use a hairdryer, hold the dryer at least eight inches from the phone and apply heat for two minutes in a circular motion around the edges of the phone.

Step 4

  • Insert a Jimmy under one of the heated corners of the phone to lift it slightly.
  • Insert a plastic card underneath the slightly lifted lip on the back cover and gently glide the card under the lifted phone casing.
  • There will be a small amount of tension, but this is normal as the card is removing the adhesive within the phone.
  • Remove the back cover from the phone.
  • Use high concentration (>90%) isopropyl alcohol and a lint-free cloth to remove all adhesive residue from the back cover and the frame.

Insert a Jimmy under one of the heated corners of the phone to lift it slightly.

Insert a plastic card underneath the slightly lifted lip on the back cover and gently glide the card under the lifted phone casing.

There will be a small amount of tension, but this is normal as the card is removing the adhesive within the phone.

Remove the back cover from the phone.

Use high concentration (>90%) isopropyl alcohol and a lint-free cloth to remove all adhesive residue from the back cover and the frame.

Step 5

              Speaker
  • Remove seven 3mm Phillips #00 screws from the speaker.

Remove seven 3mm Phillips #00 screws from the speaker.

Step 6

  • Use a spudger to lift and remove the speaker.

Use a spudger to lift and remove the speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 3 other contributors 


                    Quinn Jones

Member since: 10/15/2019

172 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Grand Valley State University, Team S4-G6, DeVasto Fall 2019                        

                                                  Member of Grand Valley State University, Team S4-G6, DeVasto Fall 2019 



                    GVSU-DEVASTO-F19S4G6                     


                                            4 Members                     


                                            19 Guides authored