Difficulty

Moderate

Steps

7

Time Required

                          20 - 35 minutes

Sections

2

  • Battery
  • 4 steps
  • Camera Assembly
  • 3 steps

Flags

0

  • BackOne Education Infinity:One

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Use a spudger to disconnect the black bundled cable connector from the motherboard.

Use a spudger to disconnect the black bundled cable connector from the motherboard.

1024

Step 2

  • Use a spudger to lift the black tab on top of the ZIF connector.
  • Slide the ribbon cable out of the connector.

Use a spudger to lift the black tab on top of the ZIF connector.

Slide the ribbon cable out of the connector.

Step 3

  • Use a spudger to flip up the black retaining flap on the ZIF connector.
  • Pull the folded ribbon cable straight out of the connector.
  • This ribbon cable must be disconnected before removing the battery because it is attached to the battery with adhesive.

Use a spudger to flip up the black retaining flap on the ZIF connector.

Pull the folded ribbon cable straight out of the connector.

This ribbon cable must be disconnected before removing the battery because it is attached to the battery with adhesive.

Step 4

  • Use a spudger to pry the battery away from the device.
  • Always use ESD safe tools when working with delicate electrical components.

Use a spudger to pry the battery away from the device.

Always use ESD safe tools when working with delicate electrical components.

Step 5

              Camera Assembly
  • Use a spudger to flip up the black flap on the camera’s ZIF connector.
  • Pull the ribbon cable straight out of the connector.

Use a spudger to flip up the black flap on the camera’s ZIF connector.

Pull the ribbon cable straight out of the connector.

Step 6

  • Use tweezers to remove the black cushion surrounding the camera lens.

Use tweezers to remove the black cushion surrounding the camera lens.

Step 7

  • Use tweezers to lift the camera assembly away from the device.
  • Lift straight up to avoid tearing the delicate ribbon cable on the retaining wall.

Use tweezers to lift the camera assembly away from the device.

Lift straight up to avoid tearing the delicate ribbon cable on the retaining wall.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Taylor Bratsch

Member since: 09/06/2016

5,438 Reputation

                                      14 Guides authored                  



                       Badges:
                       32







                                                        +29 more badges