One Education Infinity One Battery Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 - 30 minutes            

Sections

2

• Top Case
• 1 step
• Battery
• 4 steps

Flags

0

• BackOne Education Infinity:One

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Top Case               

• Insert a Jimmy or other prying tool into the seam between the screen and back case.
• Trace around the edges until all clips are released.
• Lift the back case away from the tablet.

Insert a Jimmy or other prying tool into the seam between the screen and back case.

Trace around the edges until all clips are released.

Lift the back case away from the tablet.

1024

Step 2

              Battery               

• Use a spudger to disconnect the black bundled cable connector from the motherboard.

Use a spudger to disconnect the black bundled cable connector from the motherboard.

Step 3

• Use a spudger to lift the black tab on top of the ZIF connector.
• Slide the ribbon cable out of the connector.

Use a spudger to lift the black tab on top of the ZIF connector.

Slide the ribbon cable out of the connector.

Step 4

• Use a spudger to flip up the black retaining flap on the ZIF connector.
• Pull the folded ribbon cable straight out of the connector.
• This ribbon cable must be disconnected before removing the battery because it is attached to the battery with adhesive.

Use a spudger to flip up the black retaining flap on the ZIF connector.

Pull the folded ribbon cable straight out of the connector.

This ribbon cable must be disconnected before removing the battery because it is attached to the battery with adhesive.

Step 5

• Use a spudger to pry the battery away from the device.
• Always use ESD safe tools when working with delicate electrical components.

Use a spudger to pry the battery away from the device.

Always use ESD safe tools when working with delicate electrical components.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Taylor Bratsch                     

Member since: 09/06/2016

5,438 Reputation

                                      14 Guides authored                  



                       Badges:
                       32







                                                        +29 more badges