One Education Infinity Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 - 15 minutes

Sections

Back Case
3 steps
Battery
2 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

BackOne Education Infinity
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

The Infinity was released in Spring 2019 and is NOT the same as the Infinity: One.

What you need

Step 1

              Back Case

Always power off your device before beginning disassembly.
Remove the screw covers and rubber feet from the bottom of the laptop with a metal spudger.

Always power off your device before beginning disassembly.

Remove the screw covers and rubber feet from the bottom of the laptop with a metal spudger.

1024

Step 2

Using a Phillips #00 screwdriver, remove the sixteen 5.0 mm black screws from the back panel.

Using a Phillips #00 screwdriver, remove the sixteen 5.0 mm black screws from the back panel.

Step 3

Using the iFixit plastic opening tool or spudger, start near the white hinge of the device and lift along the outer edges of the device until all clips are released.
Lift the back case off of the device.
Removing the back may create a loud snapping noise.

Using the iFixit plastic opening tool or spudger, start near the white hinge of the device and lift along the outer edges of the device until all clips are released.

Lift the back case off of the device.

Removing the back may create a loud snapping noise.

Step 4

              Battery

There may be black tape inside your device covering components or holding down wires. This tape is unimportant for the function of the device, and can be removed.
Carefully wiggle the battery cable to the right and out of the port with a plastic spudger.

There may be black tape inside your device covering components or holding down wires. This tape is unimportant for the function of the device, and can be removed.

Carefully wiggle the battery cable to the right and out of the port with a plastic spudger.

Step 5

Wedge a plastic spudger underneath the battery from the upper edge and slide it carefully along the length of the battery to separate it from the case.
There is a mild adhesive holding down the battery. Take care not to puncture or excessively bend the battery while freeing it from the adhesive.
Lift the battery out from the internal case.

Wedge a plastic spudger underneath the battery from the upper edge and slide it carefully along the length of the battery to separate it from the case.

There is a mild adhesive holding down the battery. Take care not to puncture or excessively bend the battery while freeing it from the adhesive.

Lift the battery out from the internal case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors

                    Jacob Barnes

Member since: 10/10/2019

193 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Cal Poly, Team S11-G4, Regan Fall 2019                        

                                                  Member of Cal Poly, Team S11-G4, Regan Fall 2019 



                    CPSU-REGAN-F19S11G4                     


                                            3 Members                     


                                            4 Guides authored

Better Introduction#

Introduction#

What you need#

Team#

Better Introduction

Introduction

What you need

Team