Difficulty

Easy

Steps

7

Time Required

                          5 - 10 minutes

Sections

1

  • Screen
  • 7 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackOnda VI10

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • Remove four Phillips head screws from back with #0 screw driver.

Remove four Phillips head screws from back with #0 screw driver.

1024

Step 2

  • Separate the back from the screen and open as shown. Make sure to open from the side with the power button to avoid damaging the ribbon cables.

Separate the back from the screen and open as shown. Make sure to open from the side with the power button to avoid damaging the ribbon cables.

Step 3

  • Using the plastic spudger, lift the black latches for the ribbon cables and slide the cables out of their sockets. Now the two halves can be separated.

Using the plastic spudger, lift the black latches for the ribbon cables and slide the cables out of their sockets. Now the two halves can be separated.

Step 4

  • There are 14 3mm long screws surrounding the screen. Using the #00 Phillips screwdriver, remove all of these screws.

There are 14 3mm long screws surrounding the screen. Using the #00 Phillips screwdriver, remove all of these screws.

Step 5

  • Using the metal spudger, depress the four plastic tabs to free the glass from the display.

Using the metal spudger, depress the four plastic tabs to free the glass from the display.

Step 6

  • Use the metal spudger again to get between the glass and the chrome trim ring. Lightly pry the glass away from the display. If this proves difficult, double check that all of the screws have been removed and that all four plastic clips are pushed in. Again, start from the side opposite the ribbon cable to avoid damaging it.

Use the metal spudger again to get between the glass and the chrome trim ring. Lightly pry the glass away from the display. If this proves difficult, double check that all of the screws have been removed and that all four plastic clips are pushed in. Again, start from the side opposite the ribbon cable to avoid damaging it.

Step 7

  • Once the glass and display have been separated, pull the glass away from the display and carefully slide the ribbon cable out of the display housing.

Once the glass and display have been separated, pull the glass away from the display and carefully slide the ribbon cable out of the display housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Solomon Hunter

Member since: 03/08/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       IUPUI, Team S4-G3, Baechle Spring 2017                        

                                                  Member of IUPUI, Team S4-G3, Baechle Spring 2017 



                    IUPUI-BAECHLE-S17S4G3                     


                                            4 Members                     


                                            6 Guides authored