Difficulty
Moderate
Steps
5
Time Required
15 minutes
Sections
1
- Battery
- 5 steps
Flags
2
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackOnda VI10
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Use a number 0 screw driver to remove the four screws.
Use a number 0 screw driver to remove the four screws.
1024
Step 2
- Power Button on the side should be pointing outward.
- Note: This is so the ribbon cables are not damaged.
Power Button on the side should be pointing outward.
Note: This is so the ribbon cables are not damaged.
Step 3
- Heat up the back of the device with a hair dryer to loosen the glue.
Heat up the back of the device with a hair dryer to loosen the glue.
Step 4
- Pry up battery from plastic using a nylon spudger or plastic opening tool.
Pry up battery from plastic using a nylon spudger or plastic opening tool.
Step 5
- Desolder the two battery cables from the mother board.
Desolder the two battery cables from the mother board.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Clint Richards
Member since: 03/22/2017
101 Reputation
1 Guide authored
Badges:
2
Team
IUPUI, Team S4-G3, Baechle Spring 2017
Member of IUPUI, Team S4-G3, Baechle Spring 2017
IUPUI-BAECHLE-S17S4G3
4 Members
6 Guides authored
mauriciano67 - Jan 28, 2019
Reply
Hi ! Thx for the tuto !
Were can i shop thé battery ?! Please ? I live in France…
