Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

2

  • Back Panel
  • 5 steps
  • Screen
  • 3 steps

Flags

0

  • BackOnda V701

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Ensure device is powered off before disassembly.
  • Remove the 4 rubber screw plugs using a spudger.

Ensure device is powered off before disassembly.

Remove the 4 rubber screw plugs using a spudger.

1024

Step 2

  • Remove the four 4.8mm mounting screws using a PH00 screwdriver.

Remove the four 4.8mm mounting screws using a PH00 screwdriver.

Step 3

  • Starting at one corner, gently pry the back panel assembly from the screen assembly using two plastic opening tools.
  • Slide the opening tools around the perimeter of the device to separate the back panel assembly from the screen assembly.

Starting at one corner, gently pry the back panel assembly from the screen assembly using two plastic opening tools.

Slide the opening tools around the perimeter of the device to separate the back panel assembly from the screen assembly.

Step 4

  • Gently lift the screen assembly away from the back cover assembly.
  • Be careful when separating the two pieces as the screen assembly is still connected to the mother board by two ribbon cables.

Gently lift the screen assembly away from the back cover assembly.

Be careful when separating the two pieces as the screen assembly is still connected to the mother board by two ribbon cables.

Step 5

  • Disconnect the two ribbon connectors by flipping the gray tabs up with a fingernail or a spudger.
  • Remove the ribbon cables.

Disconnect the two ribbon connectors by flipping the gray tabs up with a fingernail or a spudger.

Remove the ribbon cables.

Step 6

              Screen
  • Remove all 14 of the 3.6mm screws using a PH00 screwdriver.

Remove all 14 of the 3.6mm screws using a PH00 screwdriver.

Step 7

  • Gently separate the screen from the plastic border/screen holder by pulling it off with your hands.

Gently separate the screen from the plastic border/screen holder by pulling it off with your hands.

Step 8

  • Remove the grey monitor from the glass screen cover by gently lifting it up.

Remove the grey monitor from the glass screen cover by gently lifting it up.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    William Sioholm

Member since: 03/11/2015

104 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Colorado Springs, Team 4-6, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 4-6, Panko Spring 2015 



                    UCCS-PANKO-S15S4G6                     


                                            3 Members                     


                                            10 Guides authored

abdurrhman khrrat - Mar 18, 2016

Reply

بدي من هي الشاشة وين بلاقي