Difficulty
Easy
Steps
6
Time Required
40 seconds - 1 minute
Sections
2
- Back Case
- 5 steps
- Battery
- 1 step
Flags
1
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
BackOmaker M4
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Case
- Flip the device over so the front of the speaker is facing down. Make sure to place the speaker on a flat surface
Flip the device over so the front of the speaker is facing down. Make sure to place the speaker on a flat surface
1024
Step 2
- Use a T6 Torx screwdriver to remove the four 9mm screws from the back of the device.
Use a T6 Torx screwdriver to remove the four 9mm screws from the back of the device.
Step 3
- Use a magnet to remove the screws after unscrewing them and place them aside.
Use a magnet to remove the screws after unscrewing them and place them aside.
Step 4
- Carefully remove the back cover without breaking the battery wire.
Carefully remove the back cover without breaking the battery wire.
Step 5
- Remove the end of the battery connection from the motherboard by holding the end of the wire and carefully pulling it out of the socket using tweezers.
- The battery is still attached to the back cover.
Remove the end of the battery connection from the motherboard by holding the end of the wire and carefully pulling it out of the socket using tweezers.
The battery is still attached to the back cover.
Step 6
Battery
- Use the metal spudger to carefully pry along the entire side of the battery from its connecting tape on the back cover.
Use the metal spudger to carefully pry along the entire side of the battery from its connecting tape on the back cover.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 5 other contributors
Carlos Pernia
Member since: 02/10/2016
170 Reputation
1 Guide authored
Badges:
9
+6 more badges
Team
USF Tampa, Team 2-2, Sullivan Spring 2016
Member of USF Tampa, Team 2-2, Sullivan Spring 2016
USFT-SULLIVAN-S16S2G2
3 Members
2 Guides authored
Mohsin - Sep 11, 2020
Reply
What battery is required for this though? Is it easily found on amazon?