Featured

Featured Guide

Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

2

  • Disassembling Olympus Stylus 1010 Case
  • 7 steps
  • Lens
  • 3 steps

Flags

This guide has been found to be exceptionally cool by the iFixit staff.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackOlympus Stylus 1010

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disassembling Olympus Stylus 1010 Case
  • Remove the five Phillips #00 bottom and right side panel screws.

Remove the five Phillips #00 bottom and right side panel screws.

1024

Step 2

  • Remove the right side panel by pulling off the large silver piece.

Remove the right side panel by pulling off the large silver piece.

Step 3

  • Remove the remaining three Phillips #00 side and front panel screws.

Remove the remaining three Phillips #00 side and front panel screws.

Step 4

  • Using your thumb and forefinger, pull off the silver name plate and silver “T-shape” piece.

Using your thumb and forefinger, pull off the silver name plate and silver “T-shape” piece.

Step 5

  • Remove the black front panel by sliding it towards the lens and then pulling it up off of the camera.

Remove the black front panel by sliding it towards the lens and then pulling it up off of the camera.

Step 6

  • Remove the three Phillips #00 screws from the front of the camera.
  • Using a spudger, lift the two tabs to separate the case—one tab on top and one tab on the right side.

Remove the three Phillips #00 screws from the front of the camera.

Using a spudger, lift the two tabs to separate the case—one tab on top and one tab on the right side.

Step 7

  • Using a plastic spudger, lift up the black clips.
  • Still using the plastic spudger, detach the gold connector strip and white connector strip.
  • Using both hands, pull the camera apart into two pieces.

Using a plastic spudger, lift up the black clips.

Still using the plastic spudger, detach the gold connector strip and white connector strip.

Using both hands, pull the camera apart into two pieces.

Step 8

              Lens
  • Using a plastic spudger, lift up the black clips.
  • Still using the spudger, detach the three gold wire tape connectors from the inside of the camera.

Still using the spudger, detach the three gold wire tape connectors from the inside of the camera.

Step 9

  • Remove the three screws from the inside of the camera using a #00 screwdriver.

Remove the three screws from the inside of the camera using a #00 screwdriver.

Step 10

  • Using your thumb and forefinger, pull the lens piece straight out from the body of the camera.

Using your thumb and forefinger, pull the lens piece straight out from the body of the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 7 other contributors 


                    Max McIntyre

Member since: 01/21/2011

526 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 13-4, Forte Winter 2011                        

                                                  Member of Cal Poly, Team 13-4, Forte Winter 2011 



                    CPSU-FORTE-W11S13G4                     


                                            6 Members                     


                                            12 Guides authored