Difficulty

Moderate

Steps

6

Time Required

                          10 - 30 minutes            

Sections

2

  • Battery
  • 1 step
  • Lens Assembly
  • 5 steps

Flags

0

  • BackOlympus Pen E-PL7

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

We highly suggest you use a magnetic project mat or an organization tray. This camera has many different types of screws and keeping them organized is key to proper reassembly.

What you need

Step 1

              Battery               
  • Turn the camera upside down.
  • Push the grey tab to the right to open the battery compartment.
  • Pull out the battery.
  • The battery is not shown in these photos.

Turn the camera upside down.

Push the grey tab to the right to open the battery compartment.

Pull out the battery.

The battery is not shown in these photos.

1024

Step 2

              Lens Assembly               
  • Use a Phillips #00 screwdriver to remove the four 6.3 mm screws from the lens mount.
  • Remove the lens mount with tweezers.

Use a Phillips #00 screwdriver to remove the four 6.3 mm screws from the lens mount.

Remove the lens mount with tweezers.

Step 3

  • Use tweezers to remove the inner metal ring.

Use tweezers to remove the inner metal ring.

Step 4

  • Use tweezers to remove the two springs lying beneath the inner metal ring.

Use tweezers to remove the two springs lying beneath the inner metal ring.

Step 5

  • Use a Phillips #00 screwdriver to remove the three 5 mm screws.
  • Remove the two 4 mm Phillips screws.

Use a Phillips #00 screwdriver to remove the three 5 mm screws.

Remove the two 4 mm Phillips screws.

Step 6

  • Press and hold the lens release button while using tweezers to remove the lens hook.
  • Use tweezers to remove the spring underneath the lens hook.

Press and hold the lens release button while using tweezers to remove the lens hook.

Use tweezers to remove the spring underneath the lens hook.

To reassemble your camera, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Kelsea Weber                     

Member since: 11/12/2015

18,948 Reputation

                                      32 Guides authored                  



                       Badges:
                       47







                                                        +44 more badges                           

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,767 Guides authored