Difficulty

Easy

Steps

7

Time Required

                          5 minutes

Sections

2

  • Battery
  • 3 steps
  • Keyboard
  • 4 steps

Flags

0

  • BackOLPC XO-4 Touch

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn the laptop upside-down, with the handle facing away from you.

Turn the laptop upside-down, with the handle facing away from you.

1024

Step 2

  • Pull the lock tabs towards the green outer edges of the laptop.
  • Hold the left lock tab in the unlock position until the battery is completely removed in the next step.

Pull the lock tabs towards the green outer edges of the laptop.

Hold the left lock tab in the unlock position until the battery is completely removed in the next step.

Step 3

  • Lift up on the middle of the battery to remove it from the device.

Lift up on the middle of the battery to remove it from the device.

Step 4

              Keyboard
  • Remove the two 2mm Phillips #1 screws from beneath the battery lock tabs.

Remove the two 2mm Phillips #1 screws from beneath the battery lock tabs.

Step 5

  • Flip the laptop over to its normal position.
  • Lift the two antennas on both sides to unlock the screen.
  • Open the laptop.

Flip the laptop over to its normal position.

Lift the two antennas on both sides to unlock the screen.

Open the laptop.

Step 6

  • Be careful not to pull the keyboard too far because there is still a ribbon cable attached to the bottom.
  • Gently lift up on the back of the keyboard.
  • Pull the keyboard up far enough to expose the ribbon cable.

Be careful not to pull the keyboard too far because there is still a ribbon cable attached to the bottom.

Gently lift up on the back of the keyboard.

Pull the keyboard up far enough to expose the ribbon cable.

Step 7

  • Gently lift up on the black connector to release the ribbon cable.
  • Gently pull the blue plastic tab up and away from the black connector.
  • Remove the keyboard from the laptop.

Gently lift up on the black connector to release the ribbon cable.

Gently pull the blue plastic tab up and away from the black connector.

Remove the keyboard from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 7 other contributors 


                    Michael Kellerman

Member since: 01/24/2013

58 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 3-30, Amido Winter 2013                        

                                                  Member of Cal Poly, Team 3-30, Amido Winter 2013 



                    CPSU-AMIDO-W13S3G30                     


                                            3 Members                     


                                            12 Guides authored