Oil Draining Procedure Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 - 15 minutes

Sections

Safety Precautions
1 step
Oil Draining Procedure
3 steps

Flags

BackWacker 4-Stroke Rammer model BS50-4AS (2019)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

This model requires up to 0.7 liters of SAE 10W-40 oil to replace drained oil.

What you need

Step 1

              Disconnect the spark plug wire

Ensure the device is powered down and cool to the touch before starting your repair.
Firmly grip the base of the spark plug wire’s connector and pull it away from the spark plug to disconnect it.

Ensure the device is powered down and cool to the touch before starting your repair.

Firmly grip the base of the spark plug wire’s connector and pull it away from the spark plug to disconnect it.

1024

Step 2

              Loosen the sight gauge

Use a 1-1/16 inch socket to break loose the oil sight gauge near the bottom of the device.
Do not fully remove the oil sight gauge yet with the device in this upright position.
The oil sight gauge doubles as the oil drain and fill plug.

Use a 1-1/16 inch socket to break loose the oil sight gauge near the bottom of the device.

Do not fully remove the oil sight gauge yet with the device in this upright position.

The oil sight gauge doubles as the oil drain and fill plug.

Step 3

              Prepare a drain pan

Lay the device down horizontally with the oil sight gauge facing down.
Position a shallow oil drain pan underneath the sight gauge.

Lay the device down horizontally with the oil sight gauge facing down.

Position a shallow oil drain pan underneath the sight gauge.

Step 4

              Drain the oil

Remove the oil sight gauge.
Let the oil drain until drips are infrequent.
Replace and retighten the oil sight gauge.
This model requires 0.7 liters of SAE 10W-40 oil.

Remove the oil sight gauge.

Let the oil drain until drips are infrequent.

Replace and retighten the oil sight gauge.

This model requires 0.7 liters of SAE 10W-40 oil.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Carsten Frauenheim

Member since: 03/10/2020

81,713 Reputation

                                      330 Guides authored                  



                       Badges:
                       38







                                                        +35 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team