Oculus Rift Tracker V2 Board Replacement Repair Guide

Difficulty

Easy

Steps

8

Time Required

                          10 - 15 minutes            

Sections

3

• Lens
• 1 step
• Display
• 5 steps
• Oculus Tracker V2 Board
• 2 steps

Flags

0

• BackOculus Rift Development Kit 1

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Lens               

• To remove the lenses, turn the right lens clockwise a quarter turn and the left lens counter-clockwise a quarter turn.

To remove the lenses, turn the right lens clockwise a quarter turn and the left lens counter-clockwise a quarter turn.

1024

Step 2

              Display               

• Use a Phillips #01 screwdriver to unscrew the four 9 mm Phillips #01 screws. (Two screws are shown in the picture, and two more screws are on the left side across from the right screws.)

Use a Phillips #01 screwdriver to unscrew the four 9 mm Phillips #01 screws. (Two screws are shown in the picture, and two more screws are on the left side across from the right screws.)

Step 3

• Carefully lift the headstrap from the display. The two parts should separate easily enough with some force.
• Once the headstrap assembly and display box are separated, the headstrap assembly can be set aside. You will be working with the display box for the rest of this guide!

Carefully lift the headstrap from the display. The two parts should separate easily enough with some force.

Once the headstrap assembly and display box are separated, the headstrap assembly can be set aside. You will be working with the display box for the rest of this guide!

Step 4

• Using the plastic opening tool, pry open the display box to reveal the LCD (Liquid Crystal Display) screen. Run the plastic opening tool around all four edges. Prying open the box may take a good amount of force.

Using the plastic opening tool, pry open the display box to reveal the LCD (Liquid Crystal Display) screen. Run the plastic opening tool around all four edges. Prying open the box may take a good amount of force.

Step 5

• Run the plastic opening tool along the bottom edge under the LCD screen to separate the adhesive holding the LCD to the display box.
• Lift the screen up to reveal the wires and circuit board.
• Ensure that all wires are in the right place upon reassembly.

Run the plastic opening tool along the bottom edge under the LCD screen to separate the adhesive holding the LCD to the display box.

Lift the screen up to reveal the wires and circuit board.

Ensure that all wires are in the right place upon reassembly.

Step 6

• Remove the wires from the circuit board on the LCD display using your fingernail or a plastic opening tool. This may take some pushing and pulling of the plastic piece.
• Don’t pull on the wires! Be sure to only pry the plastic part.
• You can now completely separate the LCD screen from the rest of the device!

Remove the wires from the circuit board on the LCD display using your fingernail or a plastic opening tool. This may take some pushing and pulling of the plastic piece.

Don’t pull on the wires! Be sure to only pry the plastic part.

You can now completely separate the LCD screen from the rest of the device!

Step 7

              Oculus Tracker V2 Board               

• Remove wires from the Tracker V2 Board using your fingernail or a plastic opening tool.

Remove wires from the Tracker V2 Board using your fingernail or a plastic opening tool.

Step 8

• On the front cover of the Oculus Headset, locate the Tracker V2 Board.
• Using the Plastic Opening Tool, pry the board from the adhesive. You will need to lift from both sides of the board.

On the front cover of the Oculus Headset, locate the Tracker V2 Board.

Using the Plastic Opening Tool, pry the board from the adhesive. You will need to lift from both sides of the board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    Jake Finelt                     

Member since: 01/15/2015

131 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Cal Poly, Team 70-5, Forte Winter 2015                        

                                                  Member of Cal Poly, Team 70-5, Forte Winter 2015 



                    CPSU-FORTE-W15S70G5                     


                                            4 Members                     


                                            6 Guides authored