Difficulty
Difficult
Steps
11
Time Required
30 minutes
Sections
3
- Eye Relief Adjustment Screw
- 3 steps
- Lenses
- 1 step
- Headset Motherboard
- 7 steps
Flags
1
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackOculus Rift Development Kit 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Eye Relief Adjustment Screw
- Remove front cover plate.
- Unplug the USB and HDMI cables from the Oculus Rift DK2.
Remove front cover plate.
Unplug the USB and HDMI cables from the Oculus Rift DK2.
1024
Step 2
- Remove the four 3/8" Phillips #0 screws from the inner portion of the headset.
Remove the four 3/8" Phillips #0 screws from the inner portion of the headset.
Step 3
- With the screws removed, gently pull the headband frame apart from the headset.
With the screws removed, gently pull the headband frame apart from the headset.
Step 4
Remove Lens
- With the Oculus facing up, twist the right lens clockwise and lift it out. Repeat for the left lens twisting counterclockwise instead.
With the Oculus facing up, twist the right lens clockwise and lift it out. Repeat for the left lens twisting counterclockwise instead.
Step 5
Headset Motherboard
- Using tweezers, carefully lift the four rubber plugs as shown. They are a bit snug and you may need to jiggle them free with the tweezers.
Using tweezers, carefully lift the four rubber plugs as shown. They are a bit snug and you may need to jiggle them free with the tweezers.
Step 6
- Remove the four 3/8" screws attaching the eyewear enclosure to the front casing.
- Read the next step before removing the faceplate!
Remove the four 3/8" screws attaching the eyewear enclosure to the front casing.
Read the next step before removing the faceplate!
Step 7
- Carefully separate the faceplate and the cover. Gently rest the cover plate on top of the faceplate as shown in the pictures.
- Do not use excessive force when separating these two pieces. There is a delicate ribbon cable connected to each.
Carefully separate the faceplate and the cover. Gently rest the cover plate on top of the faceplate as shown in the pictures.
Do not use excessive force when separating these two pieces. There is a delicate ribbon cable connected to each.
Step 8
- Gently pull out the small side tabs on the ribbon cable connector as shown to release the cable.
- Push the tabs away from you, with the headset oriented as pictured. Carefully slide the ribbon cable out.
- The headset should now be two separate pieces.
Gently pull out the small side tabs on the ribbon cable connector as shown to release the cable.
Push the tabs away from you, with the headset oriented as pictured. Carefully slide the ribbon cable out.
The headset should now be two separate pieces.
Step 9
- Unscrew the three 1/4" Phillips #00 screws as pictured and use the tweezers to lift them out.
Unscrew the three 1/4" Phillips #00 screws as pictured and use the tweezers to lift them out.
Step 10
- Lift the tape and gently pry up the video data ribbon cable using the plastic opening tool as shown.
Lift the tape and gently pry up the video data ribbon cable using the plastic opening tool as shown.
Step 11
- Gently pry back the motherboard clips to release the motherboard. The motherboard should now lift free.
Gently pry back the motherboard clips to release the motherboard. The motherboard should now lift free.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 5 other contributors
Adam
Member since: 01/20/2015
625 Reputation
4 Guides authored
Badges:
14
+11 more badges
Team
Cal Poly, Team 18-5, Maness Winter 2015
Member of Cal Poly, Team 18-5, Maness Winter 2015
CPSU-MANESS-W15S18G5
4 Members
6 Guides authored
Szatmari Attila - Oct 29, 2021
Reply
hi.
you know where possible buy the new motherboard?