Difficulty
Moderate
Steps
5
Time Required
20 minutes
Sections
1
- Camera Motherboard
- 5 steps
Flags
0
BackOculus Rift Development Kit 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Camera Motherboard
- Remove the filter from the camera as shown.
Remove the filter from the camera as shown.
1024
Step 2
- Remove the cover plate from the front face of the camera using the iFixit Opening Pick.
Remove the cover plate from the front face of the camera using the iFixit Opening Pick.
Step 3
- Remove the two 3/16" J #000 screws.
- Lift the back plate off.
Remove the two 3/16" J #000 screws.
Lift the back plate off.
Step 4
- Gently tug on the wires to free them from the motherboard.
Gently tug on the wires to free them from the motherboard.
Step 5
- Remove the four 3/16" Phillips #000 from the four corners of the motherboard.
- Remove the two 1/4" Phillips #0 screws shown to release the motherboard from the enclosure.
Remove the four 3/16" Phillips #000 from the four corners of the motherboard.
Remove the two 1/4" Phillips #0 screws shown to release the motherboard from the enclosure.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Anthony Vasquez
Member since: 01/22/2015
165 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
Cal Poly, Team 18-5, Maness Winter 2015
Member of Cal Poly, Team 18-5, Maness Winter 2015
CPSU-MANESS-W15S18G5
4 Members
6 Guides authored
