Oculus Rift Cv1 Facial Interface Replacement Repair Guide

Difficulty

Difficult

Steps

6

Time Required

                          25 - 40 minutes            

Sections

1

• Facial Interface
• 6 steps

Flags

0

• BackOculus Rift CV1

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Facial Interface               

• Pull firmly from the top of the headset facial interface to remove the foam frame.

Pull firmly from the top of the headset facial interface to remove the foam frame.

1024

Step 2

• Remove the six T3 4mm screws from the top and bottom edges of the case.

Remove the six T3 4mm screws from the top and bottom edges of the case.

Step 3

• Insert the spudger underneath the edge of the lens on the left or right side.
• Slide the spudger upwards and around the edge of the frame to undo the tabs underneath.
• Repeat for the other side of the frame.

Insert the spudger underneath the edge of the lens on the left or right side.

Slide the spudger upwards and around the edge of the frame to undo the tabs underneath.

Repeat for the other side of the frame.

Step 4

• Lift up the frame to see a tab hidden underneath the lycra mesh along the edge of the lens.
• Pull up on the tab with the spudger.
• Repeat for the corresponding tab on the other lens.

Lift up the frame to see a tab hidden underneath the lycra mesh along the edge of the lens.

Pull up on the tab with the spudger.

Repeat for the corresponding tab on the other lens.

Step 5

• Lift up on the plastic frame around the lens.
• Slide a finger around the inside edge, pulling outward from the center of the lens to release the other tabs.
• Repeat for the frame on the other lens.

Lift up on the plastic frame around the lens.

Slide a finger around the inside edge, pulling outward from the center of the lens to release the other tabs.

Repeat for the frame on the other lens.

Step 6

• Pull up along the outer frame.
• Remove the facial interface.

Pull up along the outer frame.

Remove the facial interface.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Kyle Anderson                     

Member since: 01/24/2019

190 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team S18-G4, White Winter 2019                        

                                                  Member of Cal Poly, Team S18-G4, White Winter 2019 



                    CPSU-WHITE-W19S18G4                     


                                            3 Members                     


                                            10 Guides authored