Nvidia Shield Tv 1St Generation Controller Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          7 - 10 minutes

Sections

Controller Battery
6 steps

Flags

BackNvidia Shield TV 1st Generation
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Controller Battery

Remove the indicated six screws using the T6 Torx screwdriver.

Remove the indicated six screws using the T6 Torx screwdriver.

1024

Step 2

Use the plastic opening tool to pry the face of the controller away from the body.
Make sure the controller is face down during this step as the buttons can easily fall out.

Use the plastic opening tool to pry the face of the controller away from the body.

Make sure the controller is face down during this step as the buttons can easily fall out.

Step 3

Carefully remove the indicated ribbon wires from the face of the controller.

Carefully remove the indicated ribbon wires from the face of the controller.

Step 4

Use the angled tweezers to remove the vibration motor cable, moving it upward from its socket.
Lift the vibration motor out of the front case.
Repeat for the other side.
Use the angled tweezers to remove the battery cable, moving it upward from its socket.

Use the angled tweezers to remove the vibration motor cable, moving it upward from its socket.

Lift the vibration motor out of the front case.

Repeat for the other side.

Use the angled tweezers to remove the battery cable, moving it upward from its socket.

Step 5

Using the T6 Torx screwdriver, remove the indicated eight screws from the logic board.
Lift the logic board away from the front case.

Using the T6 Torx screwdriver, remove the indicated eight screws from the logic board.

Lift the logic board away from the front case.

Step 6

Using the T6 Torx screwdriver, remove the indicated four screws from the panel.
Remove the panel from the front case.
Lift the battery from the front case to remove it.

Using the T6 Torx screwdriver, remove the indicated four screws from the panel.

Remove the panel from the front case.

Lift the battery from the front case to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      12 other people completed this guide.

Author

                                      with 2 other contributors

                    Joshua Neally

Member since: 09/25/2017

575 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team S16-G6, Eyestone Fall 2017                        

                                                  Member of USF Tampa, Team S16-G6, Eyestone Fall 2017 



                    USFT-EYESTONE-F17S16G6                     


                                            3 Members                     


                                            6 Guides authored

Rancid 3000a - Dec 31, 2017

Where can i buy the replacement Battery? What tags should i use to find it?

djcornelissen - Aug 6, 2018

LC18650 Remote Control accu

pasquale - Nov 20, 2018

https://www.amazon.it/gp/product/B074YWH…

it’s ok?

Andrew - Nov 22, 2018

Are battery packs available for the 2017 controller?

Charles Keisler - Nov 30, 2018

Simply reconnecting the battery fixed my issues

Introduction#

What you need#

Team#

Introduction

What you need

Team