Nvidia Shield Tablet Rear Case Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 20 minutes

Sections

Rear Case
3 steps

Flags

BackNvidia Shield Tablet
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Rear Case

First, remove the stylus from your tablet.

First, remove the stylus from your tablet.

1024

Step 2

Set the tablet so the buttons, microSD, and stylus port are facing you.
Open the microSD slot.
Using the flat end of the spudger tool, carefully pry open the case starting from the microSD slot, slowly sliding the spudger along the inside edge of the case.
You may want to put on your anti-static wrist strap at this point as the motherboard will be vulnerable to physical touch and electrostatic shock after the casing is removed.

Set the tablet so the buttons, microSD, and stylus port are facing you.

Open the microSD slot.

Using the flat end of the spudger tool, carefully pry open the case starting from the microSD slot, slowly sliding the spudger along the inside edge of the case.

You may want to put on your anti-static wrist strap at this point as the motherboard will be vulnerable to physical touch and electrostatic shock after the casing is removed.

Step 3

As you remove your case, be aware of small clips along the edges.
Finally, set the old casing aside.

As you remove your case, be aware of small clips along the edges.

Finally, set the old casing aside.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 4 other contributors

                    Molly Bauer

Member since: 08/27/2015

1,400 Reputation

                                      6 Guides authored                  



                       Badges:
                       22







                                                        +19 more badges

Team

                       USF Tampa, Team 2-2, Blackwell Fall 2015                        

                                                  Member of USF Tampa, Team 2-2, Blackwell Fall 2015 



                    USFT-BLACKWELL-F15S2G2                     


                                            3 Members                     


                                            11 Guides authored

damjannedelkovski - Mar 5, 2016

I snapped the cable of the dabbler on the rear case coz i didnt know there was one!

Anyone knows where can i get a new one?

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team