Difficulty

Moderate

Steps

6

Time Required

                          25 - 45 minutes

Sections

3

  • Battery Assembly
  • 4 steps
  • Fan
  • 1 step
  • Motherboard
  • 1 step

Flags

0

  • BackNvidia Shield Portable

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove Front Panel
  • Remove the seven 6.4mm T5 Torx screws from the back panel.
  • Use the spudger to separate the front and back panels.

Remove the seven 6.4mm T5 Torx screws from the back panel.

Use the spudger to separate the front and back panels.

1024

Step 2

              Remove Green Grill
  • The green grill is not screwed in so it can be pulled right out.

The green grill is not screwed in so it can be pulled right out.

Step 3

              Remove Battery Cables
  • Remove the six 6.5mm T5 Torx screws.
  • Disconnect the power wires.
  • Peel back the copper tape and disconnect the black and white wires.

Remove the six 6.5mm T5 Torx screws.

Disconnect the power wires.

Peel back the copper tape and disconnect the black and white wires.

Step 4

              Remove Battery Apparatus
  • Pull the battery apparatus out once all cables are removed.

Pull the battery apparatus out once all cables are removed.

Step 5

              Removing Fan
  • Cooling is important for electronics, the last thing they want is to overheat.
  • Remove the two 7.3mm and four 8.4mm T5 Torx screws and disconnect the power cable.
  • Lift the fan free after the screws and cable are removed.

Cooling is important for electronics, the last thing they want is to overheat.

Remove the two 7.3mm and four 8.4mm T5 Torx screws and disconnect the power cable.

Lift the fan free after the screws and cable are removed.

Step 6

              Removing Logic Board
  • The large board under the back case is the motherboard.
  • Using your T5 Torx screwdriver, remove six screws from the motherboard—two 7.3 mm screws and four 8.4 mm screws.
  • Simply pull gently on the edges of the board, wiggling it if necessary so as not to damage the ports at the top of the board.

The large board under the back case is the motherboard.

Using your T5 Torx screwdriver, remove six screws from the motherboard—two 7.3 mm screws and four 8.4 mm screws.

Simply pull gently on the edges of the board, wiggling it if necessary so as not to damage the ports at the top of the board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 9 other contributors 


                    Marc Perez

Member since: 09/29/2014

542 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Tampa, Team 1-1, Hickman Fall 2014                        

                                                  Member of USF Tampa, Team 1-1, Hickman Fall 2014 



                    USFT-HICKMAN-F14S1G1                     


                                            4 Members                     


                                            12 Guides authored

Konstantin Styngu - Jun 14, 2019

Reply

Hay ich suche Ersatzteile für Nvidia shield Portable ich suche Board da wo kühler drauf ist , weil mein ist kaput gegangen :(