Difficulty

Easy

Steps

5

Time Required

                          20 minutes

Sections

2

  • Battery Assembly
  • 4 steps
  • Controller Buttons
  • 1 step

Flags

0

  • BackNvidia Shield Portable

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before starting the guide make sure to have a clean work area to disassemble the controller and that you have the replacement buttons.

Feel free to use any replacement parts you are most comfortable with and fit the Nvidia Shield Portable controller.

What you need

Step 1

              Remove Front Panel
  • Remove the seven 6.4mm T5 Torx screws from the back panel.
  • Use the spudger to separate the front and back panels.

Remove the seven 6.4mm T5 Torx screws from the back panel.

Use the spudger to separate the front and back panels.

1024

Step 2

              Remove Green Grill
  • The green grill is not screwed in so it can be pulled right out.

The green grill is not screwed in so it can be pulled right out.

Step 3

              Remove Battery Cables
  • Remove the six 6.5mm T5 Torx screws.
  • Disconnect the power wires.
  • Peel back the copper tape and disconnect the black and white wires.

Remove the six 6.5mm T5 Torx screws.

Disconnect the power wires.

Peel back the copper tape and disconnect the black and white wires.

Step 4

              Remove Battery Apparatus
  • Pull the battery apparatus out once all cables are removed.

Pull the battery apparatus out once all cables are removed.

Step 5

              Removing Button Board
  • Remove seven 6.5 mm T5 torx screws from the button board.
  • Refer to the second image as some screws are not visible in the first image. One of these screws is covered by the orange ribbon.
  • Remove the button board.

Remove seven 6.5 mm T5 torx screws from the button board.

Refer to the second image as some screws are not visible in the first image. One of these screws is covered by the orange ribbon.

Remove the button board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 6 other contributors 


                    Daniel Eberhart

Member since: 09/22/2014

379 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team 1-1, Hickman Fall 2014                        

                                                  Member of USF Tampa, Team 1-1, Hickman Fall 2014 



                    USFT-HICKMAN-F14S1G1                     


                                            4 Members                     


                                            12 Guides authored

Chirag Khatri - Mar 13, 2017

Reply

From where can I get the buttons?

Knut Gunnar Walle - May 28, 2017

Reply

Hey:) I am not sure