Difficulty
Difficult
Steps
12
Time Required
35 minutes
Sections
5
- Camera
- 3 steps
- Speaker
- 2 steps
- Motherboard
- 4 steps
- Battery
- 1 step
- Glass Screen
- 2 steps
Flags
0
BackNuVision 10.1 Atom TM101W535L
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Camera
- Turn the device screen side down.
- Carefully remove the back piece with the iFixit opening tool.
Turn the device screen side down.
Carefully remove the back piece with the iFixit opening tool.
1024
Step 2
- Remove the yellow tape covering the motherboard gently with your fingers.
Remove the yellow tape covering the motherboard gently with your fingers.
Step 3
- Pull the camera plug upward and away from the motherboard with your fingers.
- Gently pull the camera from the device. The camera is held by tension.
Pull the camera plug upward and away from the motherboard with your fingers.
Gently pull the camera from the device. The camera is held by tension.
Step 4
Speaker
- Carefully remove silver tape with your fingers.
Carefully remove silver tape with your fingers.
Step 5
- Remove speakers gently using your fingers, they pop out easily.
- Disconnect cords attached to the speaker from white pod.
Remove speakers gently using your fingers, they pop out easily.
Disconnect cords attached to the speaker from white pod.
Step 6
Motherboard
- Disconnect the press-fit black and red curly wire from where it connects on the motherboard.
Disconnect the press-fit black and red curly wire from where it connects on the motherboard.
Step 7
- Gently remove the battery’s three ZIF connectors from the motherboard. Use your fingers.
- Be careful not to puncture the battery.
Gently remove the battery’s three ZIF connectors from the motherboard. Use your fingers.
Be careful not to puncture the battery.
Step 8
- Disconnect the battery’s bundled cable connector from the motherboard with fingers.
Disconnect the battery’s bundled cable connector from the motherboard with fingers.
Step 9
- Remove the four black 3.32mm screws on the corners of the motherboard using the Phillips #000 screwdriver. The motherboard should come out easily.
Remove the four black 3.32mm screws on the corners of the motherboard using the Phillips #000 screwdriver. The motherboard should come out easily.
Step 10
Battery
- Pry the battery away from the display screen gently using a nylon spudger or the plastic opening tools.
- Using a metal spudger may bend or puncture the battery. Lithium batteries are prone to explode.
- There is a lot of adhesive, take your time and be careful.
Pry the battery away from the display screen gently using a nylon spudger or the plastic opening tools.
Using a metal spudger may bend or puncture the battery. Lithium batteries are prone to explode.
There is a lot of adhesive, take your time and be careful.
Step 11
Glass Screen
- Remove six silver 2.8mm screws surrounding the battery using the Phillips #000 screwdriver.
Remove six silver 2.8mm screws surrounding the battery using the Phillips #000 screwdriver.
Step 12
- Remove tape securing the camera to the device gently using your fingers.
- Pry display screen away from screen glass gently using your fingers.
Remove tape securing the camera to the device gently using your fingers.
Pry display screen away from screen glass gently using your fingers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Carly Daniele
Member since: 02/14/2019
567 Reputation
5 Guides authored
Badges:
13
+10 more badges
Team
USF Tampa, Team S1-G5, Leahy Spring 2019
Member of USF Tampa, Team S1-G5, Leahy Spring 2019
USFT-LEAHY-S19S1G5
5 Members
6 Guides authored
