Difficulty
Easy
Steps
9
Time Required
5 minutes
Sections
1
- Audio Jacks
- 9 steps
Flags
0
BackNumark TT1600
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Audio Jacks
- Flip over the turntable and remove the nine screws on the outer edges.
Flip over the turntable and remove the nine screws on the outer edges.
1024
Step 2
- Find the audio jacks located on the back side of the turntable.
- Remove the screw located in between the right and left audio jacks.
Find the audio jacks located on the back side of the turntable.
Remove the screw located in between the right and left audio jacks.
Step 3
- Remove the back cover by pulling it apart.
Remove the back cover by pulling it apart.
Step 4
- Remove the grounding hardware located next to the audio jacks.
Remove the grounding hardware located next to the audio jacks.
Step 5
- Remove the ground screw and washers.
Remove the ground screw and washers.
Step 6
- Remove the remaining nut and washer.
Remove the remaining nut and washer.
Step 7
- Remove the screw located on the back panel of the audio jack housing.
Remove the screw located on the back panel of the audio jack housing.
Step 8
- Remove the screw that connects the audio jacks to the biggest circuit board via wire.
Remove the screw that connects the audio jacks to the biggest circuit board via wire.
Step 9
- Gently pull out the audio input jacks from the audio input housing.
Gently pull out the audio input jacks from the audio input housing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Nikolai
Member since: 10/12/2011
236 Reputation
5 Guides authored
Badges:
8
+5 more badges
Team
Cal Poly, Team 17-14, Regan Fall 2011
Member of Cal Poly, Team 17-14, Regan Fall 2011
CPSU-REGAN-F11S17G14
4 Members
11 Guides authored