Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

1

  • NOZZLE JAM
  • 6 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackPROTOCENTRE 999

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              PREHEATING THE MACHINE
  • ON the power switch.
  • Go to prepare .
  • Click the option , preheat.
  • Go back to the main menu, check whether the nozzle temperature is increasing to the set temperature.

ON the power switch.

Go to prepare .

Click the option , preheat.

Go back to the main menu, check whether the nozzle temperature is increasing to the set temperature.

1024

Step 2

              REMOVE TEFLON TUBE
  • Remove the teflon tube from the nozzle block.
  • In some case the teflon tube will not come out free. In this case, increase the temperature to 280 deg and try to remove the teflon tube.

Remove the teflon tube from the nozzle block.

In some case the teflon tube will not come out free. In this case, increase the temperature to 280 deg and try to remove the teflon tube.

Step 3

              CLEENING WITH NEEDLE
  • Take the needle, and try to clean it from the top of the nozzle block.
  • In some case, jammed filament will not come out free. At this case , increase the nozzle temperature to 280deg and remove the nozzle cooler fan.
  • And try to clean the nozzle from the top with the help of a needle and a nose plier.
  • If the nozzle is again not clean, try to clean the nozzle by removing the nozzle tip with the help of a nose plier and spanner. Again clean it with the help of a needle.
  • NOTE: Be careful while removing the nozzle tip. If you extract more pressure on the nozzle tip, it may break. So be careful while doing it.

Take the needle, and try to clean it from the top of the nozzle block.

In some case, jammed filament will not come out free. At this case , increase the nozzle temperature to 280deg and remove the nozzle cooler fan.

And try to clean the nozzle from the top with the help of a needle and a nose plier.

If the nozzle is again not clean, try to clean the nozzle by removing the nozzle tip with the help of a nose plier and spanner. Again clean it with the help of a needle.

NOTE: Be careful while removing the nozzle tip. If you extract more pressure on the nozzle tip, it may break. So be careful while doing it.

Step 4

              REASSEMBLE.
  • Reassemble the nozzle tip again with the help of the nose plier and spanner after cleaning the nozzle.
  • Reinsert the teflon tube.

Reassemble the nozzle tip again with the help of the nose plier and spanner after cleaning the nozzle.

Reinsert the teflon tube.

Step 5

              CHECKING OF EXTRUSION
  • Go to prepare
  • click on move axis
  • Select the extrude
  • Rotate the knob in clock wise direction and check the extrusion.

Go to prepare

click on move axis

Select the extrude

Rotate the knob in clock wise direction and check the extrusion.

Step 6

              GO FOR PRINT
  • Now you can go for the print .

Now you can go for the print .

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    abhishek j

Member since: 06/27/2017

1,169 Reputation

                                      11 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge