Difficulty

Easy

Steps

8

Time Required

                          10 minutes

Sections

2

  • Nostalgia GCM200 Disassembly
  • 3 steps
  • Power Button
  • 5 steps

Flags

1

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackNostalgia GCM-200

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Nostalgia GCM200 Disassembly
  • Remove the two 1.3 mm Phillips #2 screws.
  • Remove the S6 spanner screw.
  • Carefully place these three screws somewhere safe to use later in reassembly.

Remove the two 1.3 mm Phillips #2 screws.

Remove the S6 spanner screw.

Carefully place these three screws somewhere safe to use later in reassembly.

1024

Step 2

  • Split the device in half to expose the internal parts of the device.
  • Again, there are two more Phillips screws to remove.

Split the device in half to expose the internal parts of the device.

Again, there are two more Phillips screws to remove.

Step 3

  • Remove the two screws from both sides of the heating coil.

Remove the two screws from both sides of the heating coil.

Step 4

              Power Button
  • Split the device into 2 parts to change the power button.
  • Power button hold the other parts, so be careful.

Split the device into 2 parts to change the power button.

Power button hold the other parts, so be careful.

Step 5

  • Remove (flexible) plastic sleeves from the inside end of the power cable.
  • You might want to use force, pull out while shaking it.
  • Inside the product, ensure you look at the power button and try to understand this step before you take action. There are two notches, push them at the same time on both sides to push the button out of the device.

Remove (flexible) plastic sleeves from the inside end of the power cable.

You might want to use force, pull out while shaking it.

Inside the product, ensure you look at the power button and try to understand this step before you take action. There are two notches, push them at the same time on both sides to push the button out of the device.

Step 6

  • Depress the little tab inside the top portion of the device to remove the On/Off switch.

Depress the little tab inside the top portion of the device to remove the On/Off switch.

Step 7

  • Replace the power button, and put the plastic sleeves in the original position.
  • Great, you just finished replacing power button

Replace the power button, and put the plastic sleeves in the original position.

Great, you just finished replacing power button

Step 8

  • To reassemble your device, follow these instructions in reverse order.

To reassemble your device, follow these instructions in reverse order.

This guide will help you to replace the power button

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 4 other contributors 


                    Xingdi Zhou

Member since: 06/27/2017

466 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       UW Tacoma, Team S1-G4, Liner Summer 2017                        

                                                  Member of UW Tacoma, Team S1-G4, Liner Summer 2017 



                    UWT-LINER-SU17S1G4                     


                                            4 Members                     


                                            5 Guides authored