Nostalgia Chocolate Fondue Fountain Cff965 Base Bowl Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

4

• Tiered Tower
• 1 step
• Auger
• 1 step
• Baseplate and Switch
• 3 steps
• Base Bowl
• 2 steps

Flags

2

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackNostalgia Chocolate Fondue Fountain CFF965

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Tiered Tower               

• Lift the tiered tower away from the base bowl with your hands to remove it.

Lift the tiered tower away from the base bowl with your hands to remove it.

1024

Step 2

              Auger               

• Lift the auger up and away from the base bowl by hand to remove it.

Lift the auger up and away from the base bowl by hand to remove it.

Step 3

              Baseplate and Switch               

• Flip the base over.
• Unscrew the 21.3 mm “feet” screws by hand.

Flip the base over.

Unscrew the 21.3 mm “feet” screws by hand.

Step 4

• Unscrew the three 14.2 mm screws with a Phillips #2 screwdriver.
• Unscrew the 9.1 mm screw near the switch with a Phillips #2 screwdriver.
• Unscrew the two 14.2 mm spanner screws using a spanner screwdriver (size 6).

Unscrew the three 14.2 mm screws with a Phillips #2 screwdriver.

Unscrew the 9.1 mm screw near the switch with a Phillips #2 screwdriver.

Unscrew the two 14.2 mm spanner screws using a spanner screwdriver (size 6).

Step 5

• Pull up on the baseplate by hand to remove it.
• Pull the switch component up by hand.

Pull up on the baseplate by hand to remove it.

Pull the switch component up by hand.

Step 6

              Base Bowl               

• Unscrew the two 22.1 mm machine screws that secure the motor with a Phillips #2 screwdriver.
• Remove their adjoining 5.9 mm washers by hand.

Unscrew the two 22.1 mm machine screws that secure the motor with a Phillips #2 screwdriver.

Remove their adjoining 5.9 mm washers by hand.

Step 7

• Unscrew the three 25.4 mm Phillips #2 sheet metal screws that connect the base bowl to the white plastic structure.
• When unscrewing, make sure to hold the metal tower studs on the opposite side of the base bowl (see the second picture). This will make it easier to unscrew the screws.
• Flip the base over and remove the base bowl by hand.

Unscrew the three 25.4 mm Phillips #2 sheet metal screws that connect the base bowl to the white plastic structure.

When unscrewing, make sure to hold the metal tower studs on the opposite side of the base bowl (see the second picture). This will make it easier to unscrew the screws.

Flip the base over and remove the base bowl by hand.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                    Kristen Gismondi                     

Member since: 11/12/2014

69,397 Reputation

                                      176 Guides authored                  



                       Badges:
                       44







                                                        +41 more badges                           

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored