Difficulty
Moderate
Steps
4
Time Required
15 - 30 minutes
Sections
1
- Volume/Power Buttons
- 4 steps
Flags
0
BackNook HD+
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
No hazards are present in this guide, but be mindful of how rough the motherboard and ribbons are treated.
What you need
Step 1
Volume/Power Buttons
- Open the plastic frame by wedging the plastic iFixit opening tool under the plastic frame to remove adhesive.
- Pop up all plastic tabs that secure the frame to the chassis.
Open the plastic frame by wedging the plastic iFixit opening tool under the plastic frame to remove adhesive.
Pop up all plastic tabs that secure the frame to the chassis.
1024
Step 2
- Remove twenty 5.0 mm Torx T5 screws that hold the chassis to the back casing.
- Disconnect battery from motherboard.
- Remove back casing.
Remove twenty 5.0 mm Torx T5 screws that hold the chassis to the back casing.
Disconnect battery from motherboard.
Remove back casing.
Step 3
- Disconnect both ribbons from the motherboard by pulling up on the dark grey flaps and pulling out the ribbons.
- Use tweezers to lift the flaps.
Disconnect both ribbons from the motherboard by pulling up on the dark grey flaps and pulling out the ribbons.
Use tweezers to lift the flaps.
Step 4
- Remove three 5.0 mm Torx T5 screws that secure buttons to chassis.
- Slide button assembly up and out of the chassis.
Remove three 5.0 mm Torx T5 screws that secure buttons to chassis.
Slide button assembly up and out of the chassis.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Brennan Holcombe
Member since: 03/31/2022
253 Reputation
2 Guides authored
Badges:
3
Team
IUPUI, Team 3-3, Harley Spring 2022
Member of IUPUI, Team 3-3, Harley Spring 2022
IUPUI-HARLEY-S22S3G3
3 Members
3 Guides authored