Nook Hd Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          15 - 20 minutes            

Sections

1

• Speaker
• 4 steps

Flags

2

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackNook HD+

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Take off the Top Frame               

• Wedge the plastic opening piece underneath the bottom left hand corner of the front frame
• Pry open the front frame.

Wedge the plastic opening piece underneath the bottom left hand corner of the front frame

Pry open the front frame.

1024

Step 2

              Remove the screws               

• Remove every visible screw tying the chassis to the bottom frame using a T-4 screwdriver bit.

Remove every visible screw tying the chassis to the bottom frame using a T-4 screwdriver bit.

Step 3

              Remove the Battery               

• Carefully remove the bottom frame from center chassis.
• Detach the battery ribbon from the motherboard.
• Flip the center chaise onto the screen side with the hole positioned on the bottom right hand corner.

Carefully remove the bottom frame from center chassis.

Detach the battery ribbon from the motherboard.

Flip the center chaise onto the screen side with the hole positioned on the bottom right hand corner.

Step 4

              Unscrew the speaker               

• In the bottom left hand corner remove the 3 screws that at attached to the speaker
• Disconnect the small red and black ribbon connected to the speaker from the white clip on the mother board.
• Replace old speaker with new speaker then follow instructions in reverse order to reassemble

In the bottom left hand corner remove the 3 screws that at attached to the speaker

Disconnect the small red and black ribbon connected to the speaker from the white clip on the mother board.

Replace old speaker with new speaker then follow instructions in reverse order to reassemble

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Alex Pelicas                     

Member since: 10/17/2014

283 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       UMass Dartmouth, Team 2-3, Duarte Fall 2014                        

                                                  Member of UMass Dartmouth, Team 2-3, Duarte Fall 2014 



                    UMASSD-DUARTE-F14S2G3                     


                                            5 Members                     


                                            10 Guides authored                     

Jamal Taylor - Jan 15, 2021

Reply

After purchasing a replacement speaker, these steps worked well. Process to a fairly relaxed 20 minutes.

The only thing I’d add is that the speaker is part # AAC121217U22A, and appears to be a bespoke part containing two speakers.

Knowing what part to look for may help others looking for a replacement part.