Nook Bnrv300 Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          6 minutes

Sections

Power Button
2 steps
Back Cover
4 steps
Battery
2 steps

Flags

BackNook BNRV300
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Without a properly-functioning battery, your Nook will not operate. First try troubleshooting your Nook device using these guides if your Nook does not power on, or your Nook will not hold a charge. If your Nook device still fails to operate properly, then follow this Nook BNRV300 Battery Replacement Guide.

Warning: If the battery is swelling, causing discoloration, or smelling bad, removing it may be dangerous. If you suspect your battery is damaged, see this helpful guide for what to do with a swollen battery.

What you need

Step 1

              Power Button

Power off your Nook before working on your device. Hold the power button for about 5 seconds and select the “Power Off” option.
Turn the Nook over to find the power button along the back upper edge.
Wedge the spudger between the top of the power button and the upper edge of the device.
Push the tool down to pry the button up and off.

Power off your Nook before working on your device. Hold the power button for about 5 seconds and select the “Power Off” option.

Turn the Nook over to find the power button along the back upper edge.

Wedge the spudger between the top of the power button and the upper edge of the device.

Push the tool down to pry the button up and off.

1024

Step 2

Using your fingers, take off the power button.

Using your fingers, take off the power button.

Step 3

              Back Cover

Peel off the white sticker that is covering the screw head.
Remove the one 2mm-long screw using a size T5 Torx screwdriver.

Peel off the white sticker that is covering the screw head.

Remove the one 2mm-long screw using a size T5 Torx screwdriver.

Step 4

Wedge an opening tool between the back cover and the front plastic border at the top of the device (near the power button).
This will require some force.
Slide the opening tool along the edges of the device, prying up until you are able to use your fingers to remove the back cover.
The back cover snaps as it pops off. This is normal.

Wedge an opening tool between the back cover and the front plastic border at the top of the device (near the power button).

This will require some force.

Slide the opening tool along the edges of the device, prying up until you are able to use your fingers to remove the back cover.

The back cover snaps as it pops off. This is normal.

Step 5

Use a spudger or your fingers to gently pry the connector out of the white socket.
The back cover is now fully detached.

Use a spudger or your fingers to gently pry the connector out of the white socket.

The back cover is now fully detached.

Step 6

Use tweezers to remove the brass-colored threaded fastener from the Nook plastic casing.

Use tweezers to remove the brass-colored threaded fastener from the Nook plastic casing.

Step 7

              Battery

The battery is located on the inside back cover of the Nook.
Do not use metal tools when prying up the battery. This may puncture the battery and cause harm to you and/or your device.
Insert a nylon spudger beneath the clear plastic adhesive holding the battery to the back cover.
Work around the battery, peeling up all of the adhesive.

The battery is located on the inside back cover of the Nook.

Do not use metal tools when prying up the battery. This may puncture the battery and cause harm to you and/or your device.

Insert a nylon spudger beneath the clear plastic adhesive holding the battery to the back cover.

Work around the battery, peeling up all of the adhesive.

Step 8

Hold on to one of the adhesive tabs and pull up.
This will fully remove the battery from its compartment.

Hold on to one of the adhesive tabs and pull up.

This will fully remove the battery from its compartment.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors

                    Emily Tracy

Member since: 10/03/2019

380 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Eastern Washington University, Team S1-G1, Al-Hmeyrat Fall 2019                        

                                                  Member of Eastern Washington University, Team S1-G1, Al-Hmeyrat Fall 2019 



                    EWU-AL-HMEYRAT-F19S1G1                     


                                            3 Members                     


                                            5 Guides authored

dl200010 - Jan 21, 2022

Introduction#

What you need#

Team#

Introduction

What you need

Team