Difficulty

Easy

Steps

6

Time Required

                          5 minutes

Sections

2

  • Power Button
  • 2 steps
  • Back Cover
  • 4 steps

Flags

0

  • BackNook BNRV300

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before working on your device, remove the microSD card (if there is one). This will protect the memory of your card. The microSD card is located in a slot on the upper right side of the device.

This guide will enable access to the battery, motherboard, and display.

What you need

Step 1

              Power Button
  • Power off your Nook before working on your device. Hold the power button for about 5 seconds and select the “Power Off” option.
  • Turn the Nook over to find the power button along the back upper edge.
  • Wedge the spudger between the top of the power button and the upper edge of the device.
  • Push the tool down to pry the button up and off.

Power off your Nook before working on your device. Hold the power button for about 5 seconds and select the “Power Off” option.

Turn the Nook over to find the power button along the back upper edge.

Wedge the spudger between the top of the power button and the upper edge of the device.

Push the tool down to pry the button up and off.

1024

Step 2

  • Using your fingers, take off the power button.

Using your fingers, take off the power button.

Step 3

              Back Cover
  • Peel off the white sticker that is covering the screw head.
  • Remove the one 2mm-long screw using a size T5 Torx screwdriver.

Peel off the white sticker that is covering the screw head.

Remove the one 2mm-long screw using a size T5 Torx screwdriver.

Step 4

  • Wedge an opening tool between the back cover and the front plastic border at the top of the device (near the power button).
  • This will require some force.
  • Slide the opening tool along the edges of the device, prying up until you are able to use your fingers to remove the back cover.
  • The back cover snaps as it pops off. This is normal.

Wedge an opening tool between the back cover and the front plastic border at the top of the device (near the power button).

This will require some force.

Slide the opening tool along the edges of the device, prying up until you are able to use your fingers to remove the back cover.

The back cover snaps as it pops off. This is normal.

Step 5

  • Use a spudger or your fingers to gently pry the connector out of the white socket.
  • The back cover is now fully detached.

Use a spudger or your fingers to gently pry the connector out of the white socket.

The back cover is now fully detached.

Step 6

  • Use tweezers to remove the brass-colored threaded fastener from the Nook plastic casing.

Use tweezers to remove the brass-colored threaded fastener from the Nook plastic casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Emily Tracy

Member since: 10/03/2019

380 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Eastern Washington University, Team S1-G1, Al-Hmeyrat Fall 2019                        

                                                  Member of Eastern Washington University, Team S1-G1, Al-Hmeyrat Fall 2019 



                    EWU-AL-HMEYRAT-F19S1G1                     


                                            3 Members                     


                                            5 Guides authored

dl200010 - Jan 21, 2022

Reply