Nokia Xl Dual Sim Vibrator Headphone Jack Or Camera Flash Components Replacement Repair Guide

Difficulty

Moderate

Steps

11

Time Required

                          15 - 30 minutes            

Sections

2

• Nokia XL Dual SIM Disassembly
• 5 steps
• Vibrator, Headphone Jack, or Camera Flash Components
• 6 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackNokia XL Dual SIM

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Restore your ability to receive silent phone calls by replacing a malfunctioning vibrator.

Listen to your favorite tunes while at the gym by replacing a faulty headphone jack.

Take superior quality pictures at night by replacing the camera flash components.

What you need

Step 1

              Back Cover Removal               

• You will first need to separate the back cover from the device.
• Gently pry open each side of the device at the indicated locations. It is best to use a plastic opening tool or similar tool.

You will first need to separate the back cover from the device.

Gently pry open each side of the device at the indicated locations. It is best to use a plastic opening tool or similar tool.

1024

Step 2

              Battery Removal               

• Remove the back cover.
• Use a plastic opening tool to lift the battery. Then, remove it.

Remove the back cover.

Use a plastic opening tool to lift the battery. Then, remove it.

Step 3

              Screen Separation part 1               

• To access the inner components of the device, remove the various screws. Keep them separate, and organize them by size.
• You will need a T5 Precision Torx screw driver to remove the screws.
• The locations of the T5x3.4mm screws are indicated in the picture.
• The locations of the T5x4.1mm screws are indicated in the picture.

To access the inner components of the device, remove the various screws. Keep them separate, and organize them by size.

You will need a T5 Precision Torx screw driver to remove the screws.

The locations of the T5x3.4mm screws are indicated in the picture.

The locations of the T5x4.1mm screws are indicated in the picture.

Step 4

              Screen Separation part 2               

• Use the plastic opening tool to gently pry the device apart.
• There are flaps on both sides of the phone as indicated in the picture. This is what you will need to pry apart.
• Please be cautious when opening the device. There are various connectors inside the device that must be handled with care.

Use the plastic opening tool to gently pry the device apart.

There are flaps on both sides of the phone as indicated in the picture. This is what you will need to pry apart.

Please be cautious when opening the device. There are various connectors inside the device that must be handled with care.

Step 5

              System components               

• Once the device is open, take note of all the components.

Once the device is open, take note of all the components.

Step 6

              Motherboard Connector Removal               

• With tweezers, gently undo the motherboard connector for the vibrator, headphone jack and camera flash assembly.

With tweezers, gently undo the motherboard connector for the vibrator, headphone jack and camera flash assembly.

Step 7

              Assembly Removal Pt. 1               

• With tweezers, gently pry upward on the rectangular metal piece on the back of the camera flash.

With tweezers, gently pry upward on the rectangular metal piece on the back of the camera flash.

Step 8

              Assembly Removal Pt. 2               

• With tweezers, gently pry upward on the vibrator.

With tweezers, gently pry upward on the vibrator.

Step 9

              Assembly Removal Pt. 3               

• With tweezers, gently pry upward on the headphone jack.

With tweezers, gently pry upward on the headphone jack.

Step 10

              Assembly Removal Pt. 4               

• With tweezers, gently pry up on the proximity sensor.

With tweezers, gently pry up on the proximity sensor.

Step 11

              Assembly Removal Pt. 5               

• The entire assembly can now be removed.

The entire assembly can now be removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Leonardo Jaramillo                     

Member since: 09/25/2014

84 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       USF Tampa, Team 1-4, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 1-4, Brown Fall 2014 



                    USFT-BROWN-F14S1G4                     


                                            3 Members                     


                                            7 Guides authored