Difficulty

Moderate

Steps

7

Time Required

                          15 - 30 minutes

Sections

2

  • Nokia XL Dual SIM Disassembly
  • 5 steps
  • Rear Camera
  • 2 steps

Flags

0

  • BackNokia XL Dual SIM

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover Removal
  • You will first need to separate the back cover from the device.
  • Gently pry open each side of the device at the indicated locations. It is best to use a plastic opening tool or similar tool.

You will first need to separate the back cover from the device.

Gently pry open each side of the device at the indicated locations. It is best to use a plastic opening tool or similar tool.

1024

Step 2

              Battery Removal
  • Remove the back cover.
  • Use a plastic opening tool to lift the battery. Then, remove it.

Remove the back cover.

Use a plastic opening tool to lift the battery. Then, remove it.

Step 3

              Screen Separation part 1
  • To access the inner components of the device, remove the various screws. Keep them separate, and organize them by size.
  • You will need a T5 Precision Torx screw driver to remove the screws.
  • The locations of the T5x3.4mm screws are indicated in the picture.
  • The locations of the T5x4.1mm screws are indicated in the picture.

To access the inner components of the device, remove the various screws. Keep them separate, and organize them by size.

You will need a T5 Precision Torx screw driver to remove the screws.

The locations of the T5x3.4mm screws are indicated in the picture.

The locations of the T5x4.1mm screws are indicated in the picture.

Step 4

              Screen Separation part 2
  • Use the plastic opening tool to gently pry the device apart.
  • There are flaps on both sides of the phone as indicated in the picture. This is what you will need to pry apart.
  • Please be cautious when opening the device. There are various connectors inside the device that must be handled with care.

Use the plastic opening tool to gently pry the device apart.

There are flaps on both sides of the phone as indicated in the picture. This is what you will need to pry apart.

Please be cautious when opening the device. There are various connectors inside the device that must be handled with care.

Step 5

              System components
  • Once the device is open, take note of all the components.

Once the device is open, take note of all the components.

Step 6

              Camera Removal Pt. 1
  • With tweezers, gently release the rear camera motherboard connector.

With tweezers, gently release the rear camera motherboard connector.

Step 7

              Camera Removal Pt. 2
  • Gently pull the motherboard connector upward to remove the rear camera component.

Gently pull the motherboard connector upward to remove the rear camera component.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Shadeed Bilal

Member since: 09/25/2014

219 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       USF Tampa, Team 1-4, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 1-4, Brown Fall 2014 



                    USFT-BROWN-F14S1G4                     


                                            3 Members                     


                                            7 Guides authored