Difficulty

Moderate

Steps

8

Time Required

                          15 - 30 minutes

Sections

2

  • Nokia XL Dual SIM Disassembly
  • 5 steps
  • Motherboard
  • 3 steps

Flags

0

  • BackNokia XL Dual SIM

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover Removal
  • You will first need to separate the back cover from the device.
  • Gently pry open each side of the device at the indicated locations. It is best to use a plastic opening tool or similar tool.

You will first need to separate the back cover from the device.

Gently pry open each side of the device at the indicated locations. It is best to use a plastic opening tool or similar tool.

1024

Step 2

              Battery Removal
  • Remove the back cover.
  • Use a plastic opening tool to lift the battery. Then, remove it.

Remove the back cover.

Use a plastic opening tool to lift the battery. Then, remove it.

Step 3

              Screen Separation part 1
  • To access the inner components of the device, remove the various screws. Keep them separate, and organize them by size.
  • You will need a T5 Precision Torx screw driver to remove the screws.
  • The locations of the T5x3.4mm screws are indicated in the picture.
  • The locations of the T5x4.1mm screws are indicated in the picture.

To access the inner components of the device, remove the various screws. Keep them separate, and organize them by size.

You will need a T5 Precision Torx screw driver to remove the screws.

The locations of the T5x3.4mm screws are indicated in the picture.

The locations of the T5x4.1mm screws are indicated in the picture.

Step 4

              Screen Separation part 2
  • Use the plastic opening tool to gently pry the device apart.
  • There are flaps on both sides of the phone as indicated in the picture. This is what you will need to pry apart.
  • Please be cautious when opening the device. There are various connectors inside the device that must be handled with care.

Use the plastic opening tool to gently pry the device apart.

There are flaps on both sides of the phone as indicated in the picture. This is what you will need to pry apart.

Please be cautious when opening the device. There are various connectors inside the device that must be handled with care.

Step 5

              System components
  • Once the device is open, take note of all the components.

Once the device is open, take note of all the components.

Step 6

              Removing Connectors
  • With tweezers, gently unsnap the motherboard connectors for all components.
  • The location of all the connectors is indicated in the next step.

With tweezers, gently unsnap the motherboard connectors for all components.

The location of all the connectors is indicated in the next step.

Step 7

              Connector Locations
  • The 3 motherboard connectors for the touchscreen, volume buttons, and power/screen lock button assembly are indicated on the picture.
  • The touchscreen assembly can now be removed and set aside.
  • The motherboard connector for the front camera is indicated on the picture.
  • The motherboard connector for the camera flash, vibrator, and headphone jack assembly is indicated in the picture.
  • The motherboard connector for the front camera is indicated on the picture.

The 3 motherboard connectors for the touchscreen, volume buttons, and power/screen lock button assembly are indicated on the picture.

The touchscreen assembly can now be removed and set aside.

The motherboard connector for the front camera is indicated on the picture.

The motherboard connector for the camera flash, vibrator, and headphone jack assembly is indicated in the picture.

Step 8

              Remove motherboard
  • Gently pry up on the top underside of the motherboard with the small plastic opening tool.
  • Gently pulling upward on the motherboard will allow it to be removed.

Gently pry up on the top underside of the motherboard with the small plastic opening tool.

Gently pulling upward on the motherboard will allow it to be removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.

Author

                                      with 4 other contributors 


                    Christopher Weaver

Member since: 09/25/2014

975 Reputation

                                      2 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       USF Tampa, Team 1-4, Brown Fall 2014                        

                                                  Member of USF Tampa, Team 1-4, Brown Fall 2014 



                    USFT-BROWN-F14S1G4                     


                                            3 Members                     


                                            7 Guides authored

jmwachofi8 - Nov 16, 2016

Reply

I removed my charging system while removing the charger from the phone after that i sgave it to phone repaire to insert a new charging system ,When my phone was ready he gave it to me,After i switched it on it turned bluish incolour the whole screen,so what can i do pls?

John - Oct 9, 2017

Reply

My phone is not charging when I plug it on the wall you ll see the charging indication on the battle sign on the phone that it is charging but it won’t from morning to the next day it ll not what should i do,please