Difficulty
Moderate
Steps
6
Time Required
15 - 30 minutes
Sections
2
- Nokia XL Dual SIM Disassembly
- 5 steps
- Front Camera
- 1 step
Flags
0
BackNokia XL Dual SIM
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover Removal
- You will first need to separate the back cover from the device.
- Gently pry open each side of the device at the indicated locations. It is best to use a plastic opening tool or similar tool.
You will first need to separate the back cover from the device.
Gently pry open each side of the device at the indicated locations. It is best to use a plastic opening tool or similar tool.
1024
Step 2
Battery Removal
- Remove the back cover.
- Use a plastic opening tool to lift the battery. Then, remove it.
Remove the back cover.
Use a plastic opening tool to lift the battery. Then, remove it.
Step 3
Screen Separation part 1
- To access the inner components of the device, remove the various screws. Keep them separate, and organize them by size.
- You will need a T5 Precision Torx screw driver to remove the screws.
- The locations of the T5x3.4mm screws are indicated in the picture.
- The locations of the T5x4.1mm screws are indicated in the picture.
To access the inner components of the device, remove the various screws. Keep them separate, and organize them by size.
You will need a T5 Precision Torx screw driver to remove the screws.
The locations of the T5x3.4mm screws are indicated in the picture.
The locations of the T5x4.1mm screws are indicated in the picture.
Step 4
Screen Separation part 2
- Use the plastic opening tool to gently pry the device apart.
- There are flaps on both sides of the phone as indicated in the picture. This is what you will need to pry apart.
- Please be cautious when opening the device. There are various connectors inside the device that must be handled with care.
Use the plastic opening tool to gently pry the device apart.
There are flaps on both sides of the phone as indicated in the picture. This is what you will need to pry apart.
Please be cautious when opening the device. There are various connectors inside the device that must be handled with care.
Step 5
System components
- Once the device is open, take note of all the components.
Once the device is open, take note of all the components.
Step 6
Camera Removal
- With Tweezers, gently unsnap the front camera motherboard connector.
- The front camera component can now be gently removed.
With Tweezers, gently unsnap the front camera motherboard connector.
The front camera component can now be gently removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 5 other contributors
Shadeed Bilal
Member since: 09/25/2014
219 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
USF Tampa, Team 1-4, Brown Fall 2014
Member of USF Tampa, Team 1-4, Brown Fall 2014
USFT-BROWN-F14S1G4
3 Members
7 Guides authored
zmohye - Jun 5, 2016
Reply
merci 1000 fois pour ce cite