Difficulty

Easy

Steps

6

Time Required

                          30 minutes            

Sections

2

  • How to open up a Nokia N9
  • 3 steps
  • Battery
  • 3 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackNokia N9

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              remove top parts               
  • Click open the USB input protector lid and pull it from the housing.
  • Also remove the SIM card holder.
  • Remove screws from the top using the T3 torx screwdriver.

Click open the USB input protector lid and pull it from the housing.

Also remove the SIM card holder.

Remove screws from the top using the T3 torx screwdriver.

1024

Step 2

              loosen the screen               
  • Press your screwdriver against the backside of the white pieces of plastic, and the screen will click out at the top side of the phone.

Press your screwdriver against the backside of the white pieces of plastic, and the screen will click out at the top side of the phone.

Step 3

              disconnect screen from phone               
  • Using a plastic tool, carefully open up the distance between the screen and the housing until the screen is only attached with 2 cables.
  • With the same plastic tool, disconnect the screen cables still attached to the phone.
  • The screen is now separated from the rest of the phone.

Using a plastic tool, carefully open up the distance between the screen and the housing until the screen is only attached with 2 cables.

With the same plastic tool, disconnect the screen cables still attached to the phone.

The screen is now separated from the rest of the phone.

Step 4

              remove screws               
  • Unscrew the marked screws using the T4 torx screwdriver.

Unscrew the marked screws using the T4 torx screwdriver.

Step 5

              remove covering               
  • You will see a strip holding the larger battery cover in place at one side.
  • Rotate the strip a quarter turn along the long axis, and lift it out.
  • Use the opening tool to lift the battery cover up and out.

You will see a strip holding the larger battery cover in place at one side.

Rotate the strip a quarter turn along the long axis, and lift it out.

Use the opening tool to lift the battery cover up and out.

Step 6

              replace the battery               
  • Click open the battery connector from beneath the connector.
  • Lift the battery from the phone and replace it.

Click open the battery connector from beneath the connector.

Lift the battery from the phone and replace it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    knipwim                     

Member since: 09/01/2018

7,452 Reputation

                                      29 Guides authored                  



                       Badges:
                       37







                                                        +34 more badges