Difficulty

Moderate

Steps

9

Time Required

                          25 - 30 minutes

Sections

3

  • Battery
  • 4 steps
  • Keypad
  • 2 steps
  • Back Camera
  • 3 steps

Flags

0

  • BackNokia N70

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Orient the phone as shown.
  • Press the button with the plastic opening tool and slide the back case downward relative to the phone.

Orient the phone as shown.

Press the button with the plastic opening tool and slide the back case downward relative to the phone.

1024

Step 2

  • Remove the battery cover by lifting it away from the phone.

Remove the battery cover by lifting it away from the phone.

Step 3

  • Insert the plastic opening tool into the marked space.
  • Lift up the side of the battery closest to the bottom edge of the phone using the plastic opening tool.

Insert the plastic opening tool into the marked space.

Lift up the side of the battery closest to the bottom edge of the phone using the plastic opening tool.

Step 4

  • Remove the battery from the phone.

Remove the battery from the phone.

Step 5

              Keypad
  • Insert the plastic opening tool in the marked areas in between the front and back covers.
  • Pry each corner with the plastic opening tool until the front case completely detaches.

Insert the plastic opening tool in the marked areas in between the front and back covers.

Pry each corner with the plastic opening tool until the front case completely detaches.

Step 6

  • Orient the phone so that the keypad is facing you.
  • Remove the keypad by lifting it away from the phone.

Orient the phone so that the keypad is facing you.

Remove the keypad by lifting it away from the phone.

Step 7

              Back Camera
  • Using T6 Torx screwdriver remove the six 15 mm torx screws.

Using T6 Torx screwdriver remove the six 15 mm torx screws.

Step 8

  • Separate the front panel from the back by lifting the bottom of the front panel at a 45 degree angle.
  • Remove the front panel by lifting the panel away from the phone at a 45 degree angle.

Separate the front panel from the back by lifting the bottom of the front panel at a 45 degree angle.

Remove the front panel by lifting the panel away from the phone at a 45 degree angle.

Step 9

  • Locate the rear circuit board by flipping over the front panel.
  • Locate the rear camera and by using the plastic opening tool, gently lift the camera out of the slot.
  • Caution: Be careful when prying camera out of the slot for the connections are fragile.

Locate the rear circuit board by flipping over the front panel.

Locate the rear camera and by using the plastic opening tool, gently lift the camera out of the slot.

Caution: Be careful when prying camera out of the slot for the connections are fragile.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 5 other contributors 


                    Justin

Member since: 10/12/2011

975 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 6-2, Regan Fall 2011                        

                                                  Member of Cal Poly, Team 6-2, Regan Fall 2011 



                    CPSU-REGAN-F11S6G2                     


                                            4 Members                     


                                            10 Guides authored

sidiahmed ahmed - Apr 21, 2016

Reply

mon nokia n70 est mal camera alors quest -ce qu*on va faire