Difficulty
Easy
Steps
7
Time Required
5 - 10 minutes
Sections
2
- Screen
- 5 steps
- Battery
- 2 steps
Flags
0
BackNokia Lumia 900
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen
- Insert the pointed end of the spudger into the sim card port indicated by the picture. Then proceed to remove the sim card port entirely.
Insert the pointed end of the spudger into the sim card port indicated by the picture. Then proceed to remove the sim card port entirely.
1024
Step 2
- Use tweezers to remove the small rod in the port indicated in the picture.
Use tweezers to remove the small rod in the port indicated in the picture.
Step 3
- Separate the screen from the motherboard by prying it open with the spudger along with pulling upwards with the suction cup.
Separate the screen from the motherboard by prying it open with the spudger along with pulling upwards with the suction cup.
Step 4
- Gently pull apart the screen from the motherboard, with only the ribbons connected from the motherboard to the screen.
Gently pull apart the screen from the motherboard, with only the ribbons connected from the motherboard to the screen.
Step 5
- Disconnect the No-fuss cables from the motherboard by gently prying them up using the flat end of the black stick spudger. Make sure not to bend or crease the cable.
- Remove the screen.
Disconnect the No-fuss cables from the motherboard by gently prying them up using the flat end of the black stick spudger. Make sure not to bend or crease the cable.
Remove the screen.
Step 6
Battery
- Use the flat end of a spudger to carefully disconnect the ribbon cable.
- Make sure not to bend or crease the cable.
Use the flat end of a spudger to carefully disconnect the ribbon cable.
Make sure not to bend or crease the cable.
Step 7
- Use the flat end of a spudger to remove the battery.
- The battery may be glued down. This will be evident if the battery is difficult to lift. Use the iFixit iOpener to heat the back of the phone allowing the glue to heat and become more pliable before trying to lift the battery again. This may take several minutes.
Use the flat end of a spudger to remove the battery.
The battery may be glued down. This will be evident if the battery is difficult to lift. Use the iFixit iOpener to heat the back of the phone allowing the glue to heat and become more pliable before trying to lift the battery again. This may take several minutes.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Kourtney Collier
Member since: 03/31/2022
289 Reputation
3 Guides authored
Badges:
3
Team
IUPUI, Team 3-2, Harley Spring 2022
Member of IUPUI, Team 3-2, Harley Spring 2022
IUPUI-HARLEY-S22S3G2
3 Members
6 Guides authored