Difficulty

Moderate

Steps

7

Time Required

                          15 - 25 minutes            

Sections

1

  • Touch screen / Digitizer, LCD Display
  • 7 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackNokia Lumia 610

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

__________________________________________ Video manual: __________________________________________

What you need

Video Overview

Step 1

              Touch screen / Digitizer, LCD Display               
  • Switch off the phone and remove the battery.

Switch off the phone and remove the battery.

1024

Step 2

  • Remove 8x Torx T5 screws.
  • With a plastic tool, start with separating the middle frame from the down side.

Remove 8x Torx T5 screws.

With a plastic tool, start with separating the middle frame from the down side.

Step 3

  • The Loudspeaker is on the middle frame.
  • Disconnect the LCD Display flex cable.
  • Disconnect the Touch screen flex cable.

The Loudspeaker is on the middle frame.

Disconnect the LCD Display flex cable.

Disconnect the Touch screen flex cable.

Step 4

  • The Logic board is held by 2x locking clips at the bottom side.
  • Release it and gently remove it from the front frame.

The Logic board is held by 2x locking clips at the bottom side.

Release it and gently remove it from the front frame.

Step 5

  • Put tape on the glass to not scatter pieces.
  • Worm the glass to melt the adhesive.
  • Use plastic tools to separate the touchscreen from the frame.

Put tape on the glass to not scatter pieces.

Worm the glass to melt the adhesive.

Use plastic tools to separate the touchscreen from the frame.

Step 6

  • After separating, clean up the sticker that remains on the borders.
  • New line.Install the new touchscreen and reassemble the device.

After separating, clean up the sticker that remains on the borders.

New line.Install the new touchscreen and reassemble the device.

Step 7

  • That’s all.
  • .
  • .
  • .
  • .
  • .
  • Did you do it successfully?

That’s all.

.

Did you do it successfully?

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                    ZFix                     

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges                           

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored