Nokia Lumia 520 Touchscreen Replacement Repair Guide

Difficulty

Easy

Steps

8

Time Required

                          40 minutes            

Sections

1

• Touchscreen and LCD
• 8 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackNokia Lumia 520

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Step 1

              Touchscreen and LCD               

• Remove the back cover.

Remove the back cover.

1024

Step 2

• Remove the battery.

Remove the battery.

Step 3

• Remove 5 long screws, pink arrow
• Remove 3 short screws, blue arrow

Remove 5 long screws, pink arrow

Remove 3 short screws, blue arrow

Step 4

• With a thin tool, unhook the central body from the back cover, along the entire profile of the phone

With a thin tool, unhook the central body from the back cover, along the entire profile of the phone

Step 5

• Unclip the touchscreen connector
• Unhook the display connector
• Unhook the motherboard from the central phone body

Unclip the touchscreen connector

Unhook the display connector

Unhook the motherboard from the central phone body

Step 6

• Pull up the central frame from the touchscreen assembly by lifting the clips on the perimeter with a thin tool.

Pull up the central frame from the touchscreen assembly by lifting the clips on the perimeter with a thin tool.

Step 7

• Remove the light sensor from the old frame with the help of a heat source.
• Insert the sensor in the new frame.

Remove the light sensor from the old frame with the help of a heat source.

Insert the sensor in the new frame.

Step 8

• Remove film that protects double-sided adhesive from the new touchscreen glass
• Insert flat touchscreen into the frame slot and adhere the double sided adhesive to the frame by placing it in the correct position

Remove film that protects double-sided adhesive from the new touchscreen glass

Insert flat touchscreen into the frame slot and adhere the double sided adhesive to the frame by placing it in the correct position

To reassemble the device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             


        These translators are helping us fix the world!      Want to contribute?      Start translating › 

Special thanks to these translators:

100%

irlanda

albertob

Author

                                      with 1 other contributor 

                    Smilzo                     

Member since: 11/09/2013

10,473 Reputation

                                      39 Guides authored                  



                       Badges:
                       23







                                                        +20 more badges                           

amar harihar - Aug 8, 2019

Reply

Can the phone reboot with a gone touch screen?