Difficulty
Moderate
Steps
9
Time Required
20 - 35 minutes
Sections
1
- Touch screen Glass, LCD Display, Loudspeaker, Earpiece
- 9 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackNokia Lumia 520
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Video Overview
Step 1
Touch screen Glass, LCD Display, Loudspeaker, Earpiece
- Switch off the phone and remove any SIM and memory card.
- There are two tips T4 screws.
Switch off the phone and remove any SIM and memory card.
There are two tips T4 screws.
1024
Step 2
- Use a plastic tool to separate the back case.
- Loudspeaker / Ringer
Use a plastic tool to separate the back case.
Loudspeaker / Ringer
Step 3
- Disconnect the Touchscreen and the LCD display flex cables.
- The logic board is held by tho locking clips. Use plastic tools to remove it.
Disconnect the Touchscreen and the LCD display flex cables.
The logic board is held by tho locking clips. Use plastic tools to remove it.
Step 4
- Light proximity sensor
- Earpiece
- Audio jack connector
Light proximity sensor
Earpiece
Audio jack connector
Step 5
- Again use a plastic tool to separate the middle frame and the digitizer frame.
Again use a plastic tool to separate the middle frame and the digitizer frame.
Step 6
- This step is for those who wants to change the LCD display.
- Use a sharp object to pick up a little the display.
- Then with a spudger or a similar tool separate the display from the frame.
This step is for those who wants to change the LCD display.
Use a sharp object to pick up a little the display.
Then with a spudger or a similar tool separate the display from the frame.
Step 7
- Put some transparent tape on the broken glass.
- Use hot air to warm and soften the old adhesive tape.
- Start the separating from the middle, where the contact area is small.
Put some transparent tape on the broken glass.
Use hot air to warm and soften the old adhesive tape.
Start the separating from the middle, where the contact area is small.
Step 8
- Clean the frame
- Clean the frame from the adhesive tape remnants and install a new one if your replacement part has come without adhesive tape.
- Install the new touch screen and start with reassembling.
Clean the frame
Clean the frame from the adhesive tape remnants and install a new one if your replacement part has come without adhesive tape.
Install the new touch screen and start with reassembling.
Step 9
- That’s all.
- .
- .
- .
- .
- .
- .
- Did you do it successfully?
That’s all.
.
Did you do it successfully?
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
11 other people completed this guide.
Author
ZFix
Member since: 12/09/2013
187,195 Reputation
330 Guides authored
Badges:
35
+32 more badges
Team
Master Techs
Member of Master Techs
Community
310 Members
1,168 Guides authored
Sachin Seth - Aug 25, 2017
Reply
Toughees Telecom the most perfect place for Lumia Screen Repair
You don’t need to worry because we are with you at every step of <a href=“http://www.tougheestelecom.in/nokia-lumi… title=“Nokia Lumia Repair in Delhi”>Lumia screen repair in Delhi, as we understand what one feels when a customer has his Screen Broken or Damaged. You can call us and we will give you the best advice regarding Lumia Screen Repair in Delhi.