Difficulty

Moderate

Steps

8

Time Required

                          5 - 10 minutes

Sections

2

  • Battery
  • 3 steps
  • Audio Jack
  • 5 steps

Flags

0

  • BackNokia Lumia 520

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Insert the spudger into the crevice located between the back cover of the phone and the body of the phone.

Insert the spudger into the crevice located between the back cover of the phone and the body of the phone.

1024

Step 2

  • Lift the spudger gently to open the back cover of the phone.

Lift the spudger gently to open the back cover of the phone.

Step 3

  • Insert the spudger into the space between the batter and the battery holder to remove the battery.

Insert the spudger into the space between the batter and the battery holder to remove the battery.

Step 4

              Audio Jack
  • Unscrew the 8 screws with a Torx screw driver (T4) and make sure you know what screws went where because they are different.

Unscrew the 8 screws with a Torx screw driver (T4) and make sure you know what screws went where because they are different.

Step 5

  • Use your plastic spudger to remove the clips on the plastic casing over the motherboard. Note there are 10 clips holding the casing on(3 on the sides, 2 on the top and bottom).

Use your plastic spudger to remove the clips on the plastic casing over the motherboard. Note there are 10 clips holding the casing on(3 on the sides, 2 on the top and bottom).

Step 6

  • Carefully unclip the digitizer touch screen cable and the display screen cable using the spudger.

Carefully unclip the digitizer touch screen cable and the display screen cable using the spudger.

Step 7

  • Gently remove the motherboard.

Gently remove the motherboard.

Step 8

  • Use the plastic spudger and gently remove the audio jack and the flex connector to the audio jack away from the case.
  • You will feel some pressure since the audio jack is held in place with two sided tape.

Use the plastic spudger and gently remove the audio jack and the flex connector to the audio jack away from the case.

You will feel some pressure since the audio jack is held in place with two sided tape.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 1 other contributor 


                    Tyler Chellis

Member since: 11/03/2015

249 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team 1-5, Bhusal Fall 2015                        

                                                  Member of UMass Dartmouth, Team 1-5, Bhusal Fall 2015 



                    UMASSD-BHUSAL-F15S1G5                     


                                            3 Members                     


                                            8 Guides authored