Nokia E71X Camera Flash Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

Suggest a time??

Sections

2

• Motherboard
• 8 steps
• Camera Flash
• 1 step

Flags

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

• BackNokia E71x

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Motherboard               

• Remove battery

Remove battery

1024

Step 2

• Using Torx number 4 unscrew the four 0.5mm screws.

Using Torx number 4 unscrew the four 0.5mm screws.

Step 3

• Push in four clips to detach the body.

Push in four clips to detach the body.

Step 4

• Separate the body into two pieces.
• Be careful not to damage the screen or body. Some force will be needed to separate the body.

Separate the body into two pieces.

Be careful not to damage the screen or body. Some force will be needed to separate the body.

Step 5

• Remove the bottom piece that is clipped on.
• Some force will need to be exerted to remove the clip.

Remove the bottom piece that is clipped on.

Some force will need to be exerted to remove the clip.

Step 6

• Using Torx number 4 unscrew the two 0.7 mm screws at the top of the device.

Using Torx number 4 unscrew the two 0.7 mm screws at the top of the device.

Step 7

• Once screws are removed detach back of phone from the motherboard.
• This will require some force and maneuvering. Be careful not to break phone back or motherboard.

Once screws are removed detach back of phone from the motherboard.

This will require some force and maneuvering. Be careful not to break phone back or motherboard.

Step 8

• Replace motherboard, ensure that replacement has the same serial number.

Replace motherboard, ensure that replacement has the same serial number.

Step 9

              Camera Flash               

• Camera is located on back of camera body.
• To remove flash turn body over and gently tap on the case. The flash should fall out.

Camera is located on back of camera body.

To remove flash turn body over and gently tap on the case. The flash should fall out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Will Goldby                     

Member since: 08/29/2011

184 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Cuesta, Team 1-1, Zipperian Fall 2011                        

                                                  Member of Cuesta, Team 1-1, Zipperian Fall 2011 



                    CUESTA-ZIPPERIAN-F11S1G1                     


                                            3 Members                     


                                            4 Guides authored