Difficulty
Moderate
Steps
21
Time Required
Suggest a time??
Sections
1
- Nokia E62 Complete Disassembly
- 21 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackNokia E62
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Nokia E62 Complete Disassembly
- To start, press one of the latches at the top of the phone to open the rear cover.
To start, press one of the latches at the top of the phone to open the rear cover.
1024
Step 2
- Carefully press the other latch.
Carefully press the other latch.
Step 3
- Open rear cover by this side.
Open rear cover by this side.
Step 4
- Press the three latches to open this side of the cover.
Press the three latches to open this side of the cover.
Step 5
- Remove the rear cover.
Remove the rear cover.
Step 6
- Removed rear cover. See the latches .
Removed rear cover. See the latches .
Step 7
- Remove the screws using Torx T6 screw driver.
Remove the screws using Torx T6 screw driver.
Step 8
- Remove six T6 screws.
Remove six T6 screws.
Step 9
- Remove the assembly. The front cover will be released.
Remove the assembly. The front cover will be released.
Step 10
- The front cover released.
The front cover released.
Step 11
- To remove the display , unscrew the T6 Torx at top.
To remove the display , unscrew the T6 Torx at top.
Step 12
- CAUTION! Remove the bottom screw with T5 Torx screw driver, not T6 !
CAUTION! Remove the bottom screw with T5 Torx screw driver, not T6 !
Step 13
- Carefully disconnect the Flex cable connector. Then remove the display.
Carefully disconnect the Flex cable connector. Then remove the display.
Step 14
- Carefully remove the adhesive keyboard membrane.
- You can replace it at this step if you need to.
Carefully remove the adhesive keyboard membrane.
You can replace it at this step if you need to.
Step 15
- You can clean the keyboard surface with alcohol, if you dropped a drink here.
You can clean the keyboard surface with alcohol, if you dropped a drink here.
Step 16
- When you replace the keyboard membrane, align the two contacts at bottom.
When you replace the keyboard membrane, align the two contacts at bottom.
Step 17
- You can wash the front cover and keyboard if they are dirty.
You can wash the front cover and keyboard if they are dirty.
Step 18
- Keyboard - clean it if necessary.
Keyboard - clean it if necessary.
Step 19
- Rear side of the circuit board.
Rear side of the circuit board.
Step 20
- Speaker and antenna contacts.
Speaker and antenna contacts.
Step 21
- If necessary, you can replace the joystick, the button module or the connector housing.
If necessary, you can replace the joystick, the button module or the connector housing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 5 other contributors
Jose Gustavo Abreu Murta
Member since: 07/06/2010
4,261 Reputation
8 Guides authored
Badges:
27
+24 more badges