Difficulty
Moderate
Steps
10
Time Required
Suggest a time??
Sections
1
- Motherboard
- 10 steps
Flags
2
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
BackNokia Classic 2600c-2b
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Motherboard
- Press down on the button located at the bottom of the phone, using the center ridge as a guide.
- Pull the phone apart from the bottom, keeping the button pressed down.
- CAUTION! The plastic opening tool may be used to gain leverage. Some force is required to open.
Press down on the button located at the bottom of the phone, using the center ridge as a guide.
Pull the phone apart from the bottom, keeping the button pressed down.
CAUTION! The plastic opening tool may be used to gain leverage. Some force is required to open.
1024
Step 2
- Remove the back cover to expose the battery.
Remove the back cover to expose the battery.
Step 3
- Place a finger or plastic opening tool in the gap between the battery and the phone.
- Gently lift the battery out.
Place a finger or plastic opening tool in the gap between the battery and the phone.
Gently lift the battery out.
Step 4
- Locate the plastic latches on the left and right sides of the phone.
- Insert the plastic opening tool or a fingernail into each latch and pry them open individually.
- Note: Some force is required
Locate the plastic latches on the left and right sides of the phone.
Insert the plastic opening tool or a fingernail into each latch and pry them open individually.
Note: Some force is required
Step 5
- Remove the faceplate with the number pad attached.
Remove the faceplate with the number pad attached.
Step 6
- Turn the faceplate so the number pad faces downward.
- Lift the number pad out of the faceplate.
Turn the faceplate so the number pad faces downward.
Lift the number pad out of the faceplate.
Step 7
- Locate the six screws positions along the edges of the motherboard.
- Unscrew the six screws using the Torx 5 screwdriver (see Introduction for description of a Torx 5 screwdriver).
- CAUTION! Place the screws in a secure location.
Locate the six screws positions along the edges of the motherboard.
Unscrew the six screws using the Torx 5 screwdriver (see Introduction for description of a Torx 5 screwdriver).
CAUTION! Place the screws in a secure location.
Step 8
- Locate the orange ribbon tape connecting the metal display plate to the motherboard.
- Lift the black latch attaching the tape to the motherboard.
- Gently pull the tape out of the latch slot to remove the metal display.
Locate the orange ribbon tape connecting the metal display plate to the motherboard.
Lift the black latch attaching the tape to the motherboard.
Gently pull the tape out of the latch slot to remove the metal display.
Step 9
- Using the plastic opening tool, gently pry off the motherboard from the plastic shell.
- CAUTION! When pulling the motherboard out, be careful not to damage the battery under the lower left hand corner of the motherboard.
Using the plastic opening tool, gently pry off the motherboard from the plastic shell.
CAUTION! When pulling the motherboard out, be careful not to damage the battery under the lower left hand corner of the motherboard.
Step 10
- Turn the motherboard over and locate the orange ribbon tape connecting the display to the motherboard.
- Gently pull the tape up to remove the display.
- Replace the old motherboard with the new motherboard.
- Follow the directions in reverse order to reassemble the phone.
Turn the motherboard over and locate the orange ribbon tape connecting the display to the motherboard.
Gently pull the tape up to remove the display.
Replace the old motherboard with the new motherboard.
Follow the directions in reverse order to reassemble the phone.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Ian VanZandt
Member since: 02/14/2012
627 Reputation
5 Guides authored
Badges:
8
+5 more badges
Team
James Madison, Team 3-1, Klein Spring 2012
Member of James Madison, Team 3-1, Klein Spring 2012
JMU-KLEIN-S12S3G1
3 Members
9 Guides authored