Difficulty
Moderate
Steps
8
Time Required
1 hour
Sections
1
- Touchscreen and LCD
- 8 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackNokia C7 - 00
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Step 1
Touchscreen and LCD
- With a thin tool insert it in the cover at the bottom and pry up to release it
With a thin tool insert it in the cover at the bottom and pry up to release it
1024
Step 2
- Pry up the two points indicated by the arrows to release the keyboard
Pry up the two points indicated by the arrows to release the keyboard
Step 3
- Remove battery and battery cover
Remove battery and battery cover
Step 4
- Unscrew the 2 rear screws
- Unscrew the 2 front screws
Unscrew the 2 rear screws
Unscrew the 2 front screws
Step 5
- Gently lift the front glass and slide it slightly in the direction of the arrow so you can free it
Gently lift the front glass and slide it slightly in the direction of the arrow so you can free it
Step 6
- if the display needs to be replaced and then you have no problems if it is broken in the door, proceed with a heat source and a thin tool to be able to break it from underneath
- If the display is as good as in my case to avoid the risk of breaking it, unscrew the two red arrow screws
- Gradually unscrew the purple arrow screw so that you do not lose too much on the back of the display to avoid breaking it, at the same time lift it from the keyboard area and gradually unscrew Dino to the complete lifting of the display and its housing doing Leva also laterally on the releases
if the display needs to be replaced and then you have no problems if it is broken in the door, proceed with a heat source and a thin tool to be able to break it from underneath
If the display is as good as in my case to avoid the risk of breaking it, unscrew the two red arrow screws
Gradually unscrew the purple arrow screw so that you do not lose too much on the back of the display to avoid breaking it, at the same time lift it from the keyboard area and gradually unscrew Dino to the complete lifting of the display and its housing doing Leva also laterally on the releases
Step 7
- Lift up display assembly.
Lift up display assembly.
Step 8
- Disconnect touch screen connector
- Disconnect display connector
Disconnect touch screen connector
Disconnect display connector
To reassemble the device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
Rodolpho
irlanda
albertob
Author
with 1 other contributor
Smilzo
Member since: 11/09/2013
10,473 Reputation
39 Guides authored
Badges:
23
+20 more badges