Difficulty

Moderate

Steps

7

Time Required

                          5 minutes

Sections

3

  • Battery
  • 2 steps
  • Keypad
  • 3 steps
  • Logic Board
  • 2 steps

Flags

0

  • BackNokia 6133

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Remove the back cover of your cell phone by applying slight pressure with your thumb and pushing up towards the top of the phone.
  • Lift off back cover.

Remove the back cover of your cell phone by applying slight pressure with your thumb and pushing up towards the top of the phone.

Lift off back cover.

1024

Step 2

  • Use your index finger to first push down and then lift up the battery as shown.
  • Remove battery from cell phone.

Use your index finger to first push down and then lift up the battery as shown.

Remove battery from cell phone.

Step 3

              Keypad
  • Unscrew two T5 torx screws easily visible on the back side of the cell phone
  • Screws: 7.8mm
  • Once screw are removed, the phone will separate easily into two pieces connected by a flexible wire strip.
  • Be sure to not lose or disconnect the indicated piece that the screw mounts to. It is spring loaded and is very dificult to reattach.

Unscrew two T5 torx screws easily visible on the back side of the cell phone

Screws: 7.8mm

Once screw are removed, the phone will separate easily into two pieces connected by a flexible wire strip.

Be sure to not lose or disconnect the indicated piece that the screw mounts to. It is spring loaded and is very dificult to reattach.

Step 4

  • Use an iPod opening tool to gently pry open the back case as indicated in the picture.
  • Work your way down the side of the phone starting from the top down to the bottom. (Use multiple prying tools if necessary)
  • REPEAT on both sides, and be careful not to stab the circuitry with the tools.

Use an iPod opening tool to gently pry open the back case as indicated in the picture.

Work your way down the side of the phone starting from the top down to the bottom. (Use multiple prying tools if necessary)

REPEAT on both sides, and be careful not to stab the circuitry with the tools.

Step 5

  • Gently pull the phone apart and the flexible wire should detach from its connection as shown.
  • If not, lift up on the black tab within the left box in the picture.
  • With the front half of the phone, push the keypad towards the removed portion of the phone.
  • To clean, use a damp cloth with water.

Gently pull the phone apart and the flexible wire should detach from its connection as shown.

If not, lift up on the black tab within the left box in the picture.

With the front half of the phone, push the keypad towards the removed portion of the phone.

To clean, use a damp cloth with water.

Step 6

              Logic Board
  • Use a T6 Torx Screwdriver to remove the screw located in the bottom right corner of the back panel.
  • Screw: 6.4 mm

Use a T6 Torx Screwdriver to remove the screw located in the bottom right corner of the back panel.

Screw: 6.4 mm

Step 7

  • Lift up from the top of the logic board as shown to remove.

Lift up from the top of the logic board as shown to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Vincent Benvin

Member since: 04/19/2010

121 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 23-82, Johann Spring 2010                        

                                                  Member of Cal Poly, Team 23-82, Johann Spring 2010 



                    CPSU-JOHANN-S10S23G82                     


                                            4 Members                     


                                            5 Guides authored