Difficulty
Moderate
Steps
5
Time Required
10 minutes
Sections
2
- Battery
- 2 steps
- Keypad
- 3 steps
Flags
0
BackNokia 6133
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the back cover of your cell phone by applying slight pressure with your thumb and pushing up towards the top of the phone.
- Lift off back cover.
Remove the back cover of your cell phone by applying slight pressure with your thumb and pushing up towards the top of the phone.
Lift off back cover.
1024
Step 2
- Use your index finger to first push down and then lift up the battery as shown.
- Remove battery from cell phone.
Use your index finger to first push down and then lift up the battery as shown.
Remove battery from cell phone.
Step 3
Keypad
- Unscrew two T5 torx screws easily visible on the back side of the cell phone
- Screws: 7.8mm
- Once screw are removed, the phone will separate easily into two pieces connected by a flexible wire strip.
- Be sure to not lose or disconnect the indicated piece that the screw mounts to. It is spring loaded and is very dificult to reattach.
Unscrew two T5 torx screws easily visible on the back side of the cell phone
Screws: 7.8mm
Once screw are removed, the phone will separate easily into two pieces connected by a flexible wire strip.
Be sure to not lose or disconnect the indicated piece that the screw mounts to. It is spring loaded and is very dificult to reattach.
Step 4
- Use an iPod opening tool to gently pry open the back case as indicated in the picture.
- Work your way down the side of the phone starting from the top down to the bottom. (Use multiple prying tools if necessary)
- REPEAT on both sides, and be careful not to stab the circuitry with the tools.
Use an iPod opening tool to gently pry open the back case as indicated in the picture.
Work your way down the side of the phone starting from the top down to the bottom. (Use multiple prying tools if necessary)
REPEAT on both sides, and be careful not to stab the circuitry with the tools.
Step 5
- Gently pull the phone apart and the flexible wire should detach from its connection as shown.
- If not, lift up on the black tab within the left box in the picture.
- With the front half of the phone, push the keypad towards the removed portion of the phone.
- To clean, use a damp cloth with water.
Gently pull the phone apart and the flexible wire should detach from its connection as shown.
If not, lift up on the black tab within the left box in the picture.
With the front half of the phone, push the keypad towards the removed portion of the phone.
To clean, use a damp cloth with water.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Vincent Benvin
Member since: 04/19/2010
121 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 23-82, Johann Spring 2010
Member of Cal Poly, Team 23-82, Johann Spring 2010
CPSU-JOHANN-S10S23G82
4 Members
5 Guides authored