Difficulty
Moderate
Steps
6
Time Required
25 minutes
Sections
5
- Battery
- 2 steps
- Frame
- 1 step
- Motherboard
- 1 step
- Speaker
- 1 step
- Outer Frame
- 1 step
Flags
0
BackNokia 3310 3G
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Using the thumbtab molded on the bottom of the phone, pry the back cover off using either a fingernail or a plastic opening tool.
Using the thumbtab molded on the bottom of the phone, pry the back cover off using either a fingernail or a plastic opening tool.
1024
Step 2
- There is a molded notch in the white frame of the phone near the top right of the battery. Using either a finger or a plastic opening tool, utilize the notch to lift up on the battery, and remove it from the device.
- This specific device did not come with a battery.
There is a molded notch in the white frame of the phone near the top right of the battery. Using either a finger or a plastic opening tool, utilize the notch to lift up on the battery, and remove it from the device.
This specific device did not come with a battery.
Step 3
Frame
- Using a T5 screwdriver bit, remove the (6) 5.0 mm screws along the outside edge of the frame.
- Using a metal spudger, wedge the 6 plastic tabs molded into the outer shell away from the frame to lift up and remove it.
Using a T5 screwdriver bit, remove the (6) 5.0 mm screws along the outside edge of the frame.
Using a metal spudger, wedge the 6 plastic tabs molded into the outer shell away from the frame to lift up and remove it.
Step 4
Motherboard
- Use a spudger to simultaneously leverage the shell away and the motherboard up from the body of the shell.
Use a spudger to simultaneously leverage the shell away and the motherboard up from the body of the shell.
Step 5
Speaker
- Using a metal spudger, lodge the tip underneath the speaker and between the soft foam surrounding the screen.
- Use the metal spudger to leverage out the speaker.
- The speaker is attached to the shell with an adhesive. Do not be too aggressive in your removal, else the speaker will come apart.
Using a metal spudger, lodge the tip underneath the speaker and between the soft foam surrounding the screen.
Use the metal spudger to leverage out the speaker.
The speaker is attached to the shell with an adhesive. Do not be too aggressive in your removal, else the speaker will come apart.
Step 6
Outer Frame
- Using your finger, push the keyboard insert out of the front outer frame.
Using your finger, push the keyboard insert out of the front outer frame.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
Author
with 2 other contributors
Aaron LeBlanc
Member since: 10/24/2018
711 Reputation
5 Guides authored
Badges:
12
+9 more badges
Team
UMass Dartmouth, Team S3-G3, Peak Fall 2018
Member of UMass Dartmouth, Team S3-G3, Peak Fall 2018
UMASSD-PEAK-F18S3G3
3 Members
8 Guides authored