Difficulty

Moderate

Steps

6

Time Required

                          20 minutes

Sections

4

  • Battery
  • 2 steps
  • Frame
  • 1 step
  • Motherboard
  • 1 step
  • Keyboard
  • 2 steps

Flags

0

  • BackNokia 3310 3G

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Using the thumbtab molded on the bottom of the phone, pry the back cover off using either a fingernail or a plastic opening tool.

Using the thumbtab molded on the bottom of the phone, pry the back cover off using either a fingernail or a plastic opening tool.

1024

Step 2

  • There is a molded notch in the white frame of the phone near the top right of the battery. Using either a finger or a plastic opening tool, utilize the notch to lift up on the battery, and remove it from the device.
  • This specific device did not come with a battery.

There is a molded notch in the white frame of the phone near the top right of the battery. Using either a finger or a plastic opening tool, utilize the notch to lift up on the battery, and remove it from the device.

This specific device did not come with a battery.

Step 3

              Frame
  • Using a T5 screwdriver bit, remove the (6) 5.0 mm screws along the outside edge of the frame.
  • Using a metal spudger, wedge the 6 plastic tabs molded into the outer shell away from the frame to lift up and remove it.

Using a T5 screwdriver bit, remove the (6) 5.0 mm screws along the outside edge of the frame.

Using a metal spudger, wedge the 6 plastic tabs molded into the outer shell away from the frame to lift up and remove it.

Step 4

              Motherboard
  • Use a spudger to simultaneously leverage the shell away and the motherboard up from the body of the shell.

Use a spudger to simultaneously leverage the shell away and the motherboard up from the body of the shell.

Step 5

              Keyboard
  • Using a spudger, unclip the bottom left snap to unplug the keyboard. The image shows the motherboard rotated 90 degrees counterclockwise

Using a spudger, unclip the bottom left snap to unplug the keyboard. The image shows the motherboard rotated 90 degrees counterclockwise

Step 6

  • Using your thumb, push the tab on the right side of the motherboard over to the right and then push downward to unclip the keyboard. It should fall away.

Using your thumb, push the tab on the right side of the motherboard over to the right and then push downward to unclip the keyboard. It should fall away.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 3 other contributors 


                    Aaron LeBlanc

Member since: 10/24/2018

711 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       UMass Dartmouth, Team S3-G3, Peak Fall 2018                        

                                                  Member of UMass Dartmouth, Team S3-G3, Peak Fall 2018 



                    UMASSD-PEAK-F18S3G3                     


                                            3 Members                     


                                            8 Guides authored

OrangeShoe - yesterdayJan 23, 2023

Reply

Very useful and to the point