Difficulty

Moderate

Steps

5

Time Required

                          15 minutes            

Sections

3

  • Battery
  • 2 steps
  • Frame
  • 1 step
  • Camera
  • 2 steps

Flags

0

  • BackNokia 3310 3G

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Using the thumbtab molded on the bottom of the phone, pry the back cover off using either a fingernail or a plastic opening tool.

Using the thumbtab molded on the bottom of the phone, pry the back cover off using either a fingernail or a plastic opening tool.

1024

Step 2

  • There is a molded notch in the white frame of the phone near the top right of the battery. Using either a finger or a plastic opening tool, utilize the notch to lift up on the battery, and remove it from the device.
  • This specific device did not come with a battery.

There is a molded notch in the white frame of the phone near the top right of the battery. Using either a finger or a plastic opening tool, utilize the notch to lift up on the battery, and remove it from the device.

This specific device did not come with a battery.

Step 3

              Frame               
  • Using a T5 screwdriver bit, remove the (6) 5.0 mm screws along the outside edge of the frame.
  • Using a metal spudger, wedge the 6 plastic tabs molded into the outer shell away from the frame to lift up and remove it.

Using a T5 screwdriver bit, remove the (6) 5.0 mm screws along the outside edge of the frame.

Using a metal spudger, wedge the 6 plastic tabs molded into the outer shell away from the frame to lift up and remove it.

Step 4

              Camera               
  • Using the pointed metal spudger from the metal spudger set, insert the tool underneath the small snap clip, and disconnect it by lifting it up.

Using the pointed metal spudger from the metal spudger set, insert the tool underneath the small snap clip, and disconnect it by lifting it up.

Step 5

  • The camera is held in with double sided and foam. Using the spudger, lift up on the camera to remove it from the motherboard of the phone.

The camera is held in with double sided and foam. Using the spudger, lift up on the camera to remove it from the motherboard of the phone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Taylor Lyford                     

Member since: 10/24/2018

672 Reputation

                                      3 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       UMass Dartmouth, Team S3-G3, Peak Fall 2018                        

                                                  Member of UMass Dartmouth, Team S3-G3, Peak Fall 2018 



                    UMASSD-PEAK-F18S3G3                     


                                            3 Members                     


                                            8 Guides authored