Difficulty
Moderate
Steps
8
Time Required
Suggest a time??
Sections
3
- Battery Installation
- 2 steps
- Face Plate
- 1 step
- Liquid Crystal Display (LCD)
- 5 steps
Flags
0
BackNokia 3120
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery Installation
- Remove the back cover plate of the phone. To do this press down the lock as you slide the cover toward the bottom of the phone.
Remove the back cover plate of the phone. To do this press down the lock as you slide the cover toward the bottom of the phone.
1024
Step 2
- Once the back cover plate is removed, the battery should be exposed. Remove the battery by prying it out. This can be done with your finger-nail or a prying tool.
Once the back cover plate is removed, the battery should be exposed. Remove the battery by prying it out. This can be done with your finger-nail or a prying tool.
Step 3
Face Plate
- Using your fingernails or another tool, pry the front face plate out along its edges and corners.
Using your fingernails or another tool, pry the front face plate out along its edges and corners.
Step 4
Liquid Crystal Display (LCD)
- Once the cover plate has been removed, the keypad should easily pop out.
Once the cover plate has been removed, the keypad should easily pop out.
Step 5
- Using a screwdriver, remove the 6, 7 mm Torx-head screws on the front of the phone.
Using a screwdriver, remove the 6, 7 mm Torx-head screws on the front of the phone.
Step 6
- Once the screws have been removed, the front plate of the phone should be removed, exposing the inside electronic components of the phone.
Once the screws have been removed, the front plate of the phone should be removed, exposing the inside electronic components of the phone.
Step 7
- Take out the cell phone electronic board
Take out the cell phone electronic board
Step 8
- The LCD screen can now be removed from the body of the phone.
The LCD screen can now be removed from the body of the phone.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Pierre Tong
Member since: 03/11/2013
77 Reputation
4 Guides authored
Badges:
12
+9 more badges
Team
Clemson, Team 13-2, Benson Spring 2013
Member of Clemson, Team 13-2, Benson Spring 2013
CLEM-BENSON-S13S13G2
3 Members
14 Guides authored